Datasheet4U Logo Datasheet4U.com

DIO6809 - Ultra Low Power Microprocessor Reset Circuit

General Description

DIO6809 series are micro-processor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems.

They provide excellent circuit reliability and low cost by eliminating external components.

Key Features

  • 140ms min Reset Pulse Width 10μA Typ Supply Current @VCC=3V Guaranteed Reset Valid to VCC = +1.0V Power Supply Transient Immunity Operating Temperature Range -40°C to +85°C Available in SOT-23 and SOT-23-3L Block Diagram GND 1 /RESET 2 DIO6809 3 VCC (Top View).

📥 Download Datasheet

Datasheet Details

Part number DIO6809
Manufacturer DIOO MICROCIRCUITS
File Size 663.18 KB
Description Ultra Low Power Microprocessor Reset Circuit
Datasheet download datasheet DIO6809 Datasheet

Other Datasheets by DIOO MICROCIRCUITS

Part Number Description
DIO6001 1A Output Synchronous Step Down Converter
DIO6012B Synchronous Step Down Converter
DIO6507 High-Efficiency 1A Output Synchronous Step Down Converter
DIO6930 24V Input Synchronous Step Down Converter
DIO1159B Low THD Analog Switch
DIO1280 Over-Voltage Protection Load Switch
DIO1500 Four-pole single-throw (4PST) Depletion Mode Isolation Switch
DIO20721 RRIO 10MHz Amplifier
DIO20721D RRIO 10MHz Amplifier
DIO20722 RRIO 10MHz Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DIO6809 Ultra Low Power Microprocessor Reset Circuit Rev 1.5 Features 140ms min Reset Pulse Width 10μA Typ Supply Current @VCC=3V Guaranteed Reset Valid to VCC = +1.0V Power Supply Transient Immunity Operating Temperature Range -40°C to +85°C Available in SOT-23 and SOT-23-3L Block Diagram GND 1 /RESET 2 DIO6809 3 VCC (Top View) Applications Computers Controllers Intelligent Instruments Portable/Battery-Powered Equipment Descriptions DIO6809 series are micro-processor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components.