Datasheet4U Logo Datasheet4U.com

AP62150 - 1.5A LOW IQ SYNCHRONOUS BUCK CONVERTER

Description

The AP62150 is a 1.5A, synchronous buck converter with a wide input voltage range of 4.2V to 18V.

The device fully integrates a 90mΩ highside power MOSFET and a 65mΩ low-side power MOSFET to provide high-efficiency step-down DC-DC conversion.

Features

  • VIN: 4.2V to 18V.
  • Output Voltage (VOUT): 0.8V to 7V.
  • 1.5A Continuous Output Current.
  • 0.8V ± 1% Reference Voltage (TA = +25°C).
  • 135μA Low Quiescent Current (Pulse Frequency Modulation).
  • 1.3MHz Switching Frequency (VIN = 12V, VOUT = 5V).
  • Proprietary Gate Driver Design for Best EMI Reduction.
  • Protection Circuitry.
  • Undervoltage Lockout (UVLO).
  • Cycle-by-Cycle Valley Current Limit.
  • Thermal Shutdown.
  • Totally Lead-Free & Fully RoHS Compliant (.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP6210 WiFi 802.11b/g/n + BT4.0 SIP AMPAK
AP6210B BlueTooth-4.0 BLE-Module AMPAK
AP6212 WiFi+Bluetooth 4.0 + FM RX SIP-Module AMPAK
AP6213A Low Noise LDO Anwell Semiconductor
AP6203A 300mA Linear Regulator Anwell Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP62200 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP62200T 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP62201 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP62250 2.5A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP62300 3A LOW IQ SYNCHRONOUS BUCK CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP62150 4.2V TO 18V INPUT, 1.5A LOW IQ SYNCHRONOUS BUCK CONVERTER Description The AP62150 is a 1.5A, synchronous buck converter with a wide input voltage range of 4.2V to 18V. The device fully integrates a 90mΩ highside power MOSFET and a 65mΩ low-side power MOSFET to provide high-efficiency step-down DC-DC conversion. Pin Assignments (Top View) The AP62150 device is easily used by minimizing the external component count due to its adoption of Constant On-Time (COT) control to achieve fast transient response, easy loop stabilization, and low output voltage ripple. The AP62150 design is optimized for Electromagnetic Interference (EMI) reduction.
Published: |