0.35 mm Pitch Ultra-low Profile
FPC Back-lock Connector
FF51 Series 【Upper Contact】
FF51 series ultra-low profile FPC connector has
0.35mm pitch, depth of 3.00mm and 0.5mm mounting
The cable lock mechanism provides maximum
retention and alignment of the FPC material.
FF51 series is upper contact connector.
・The mounting height of 0.5mm is the lowest profile FPC connector in the industry.
・DDK's original rotate oval cam lock mechanism; "Back-lock" system ensure the
・DDK's cable lock mechanism provides positive retention of FPC.
・The contact position is upper contact.
・Back-lock structure ensures retention from inadvertent upward pulling of the FPC
・Connectors are delivered with the lock lever opened resulting in assembly time savings
during FPC insertion.
・Nickel barrier prevents solder wicking.
Note: ※ Please do not close the lock lever without inserting the FPC.
※ Since the cable lock tabs electrically conductive on both ends, please do not use the cable lock tabs as ground tabs.
LCD Back-light module, Touch Panel, Accessary module
Dielectric Withstand Voltage
0.2A / Contact
200V AC(r.m.s.) /1 minute
50 M Ω min. at 250V DC
80m Ω max.
Material / Finish
Copper Alloy / Au (Flash) over Ni
LCP Resin（UL94V-0）/ Ivory
PPS Resin（UL94V-0）/ Black
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
Free Datasheet http://www.datasheet4u.com/