PT27310
Features
- Designed for switching mode power supply applications
- High dielectric strength capability 3750V RMS
- Frequency range 50k Hz
- 200k Hz
- VDE Approved
- Fully molded construction with center thru hole for primary lead
- Tinned Leads with Leaded Solder is Available (note 2)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part Number Turns
PT27310 PT27311 PT27312 PT27313 PT27314 PT27315 PT27316
50 100 200 300 50CT 100CT 200CT
Inductance m H (Min)
Inductance Test Voltage
15.75 k Hz
DCR Ohm (Max)
5.0 0.50
20.0 1.00
80.0 2.00
180.0 3.00 11.00
5.0 0.50
20.0 1.00
80.0 2.00
Rated Terminating Resistance Ohm (Max)
50 100 200 300
50 100 200
Schematic/ Mechanical
Figure
Pri Unipolar Amp-µSec
Max. Rating
A 150 A 300 A 600 A 900 B 150 B 300 B 600
Notes: 1.
2. 3.
Stand-off shown in two possible positions For non-Ro HS parts, replace PT prefix with 42- (e.g. PT27310...
