Datasheet4U Logo Datasheet4U.com

S25FL128P - 128-Mb 3.0 V Flash Memory

Description

The S25FL128P is a 3.0 Volt (2.7V to 3.6V), single-power-supply Flash memory device.

The device consists of 64 sectors of 256 KB memory, or 256 sectors of 64 KB memory.

The device accepts data written to SI (Serial Input) and outputs data on SO (Serial Output).

Features

  • Memory Protection.
  • WP#/ACC pin works in conjunction with Status Register Bits to protect specified memory areas.
  • 256 KB uniform sector product: Status Register Block Protection bits (BP2, BP1, BP0) in status register configure parts of memory as read-only.
  • 64KB uniform sector product: Status Register Block Protection bits (BP3, BP2, BP1, BP0) in status register configure parts of memory as read-only Software Features.
  • SPI Bus Compatible Serial Interface.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S25FL128P 128 Megabit CMOS 3.0 Volt Flash Memory SPANSION
S25FL128K 128-Mbit CMOS 3.0 Volt Flash Memory SPANSION
S25FL128L 3.0V FL-L Flash Memory Cypress
S25FL128L FL-L flash Infineon
S25FL128S 3.0V SPI Flash Memory Cypress

Other Datasheets by Cypress (Infineon)

Part Number Description
S25FL127S 128 Mbit (16 Mbyte) 3.0V SPI Flash Memory
S25FL129P 128-Mbit 3.0 V Flash Memory
S25FL116K 3.0V SPI Flash Memory
S25FL132K 3.0V SPI Flash Memory
S25FL164K 3.0V SPI Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S25FL128P 128-Mbit, 3.0 V Flash Memory This product is not recommended for new and current designs. For new and current designs, S25FL128S supersedes S25FL128P. This is the factory-recommended migration path. Please refer to the S25FL128S data sheet for specifications and ordering information. Distinctive Characteristics Architectural Advantages  Single power supply operation – Full voltage range: 2.7V to 3.6V read and program operations  Memory Architecture – 128Mb uniform 256 KB sector product – 128Mb uniform 64 KB sector product  Program – Page Program (up to 256 bytes) in 1.5 ms (typical) – Faster program time in Accelerated Programming mode (8.5 V–9.5 V on #WP/ACC) in 1.2 ms (typical)  Erase – 2 s typical 256 KB sector erase time – 0.
Published: |