MB90340E Datasheet | Cypress

feature are the on-board CAN Interfaces, which conform to V2.0 Part A and Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full CAN approach. The power to the MCU core (3 V) is supplied by a built-in regulator circuit, giving these microcontrollers superior performance in terms of power consumption and tolerance to EMI. Features - Instruction system best suited to controller - Wide choice of data types (bit, byte, word, and long word) - Wide choice of addressing modes (23 types) - Enhanced functionality with signed multiply and divide instructions and the RETI instruction - Enhanced high-precision puting with 32-bit accumulator - Instruction system patible with high-level language (C language) and multitask - Employing system stack pointer - Various enhanced pointer indirect instructions - Barrel shift instructions - Increased processing speed - 4-byte instruction queue Serial interface - LIN-UART : 4 channels - Equipped with full-duplex double buffer - Clock-asynchronous or clock-synchronous serial transmission is available - I2C interface : 2 channels (only for devices with a C suffix in the part number) - Up to 400 kbps transfer rate Interrupt controller - Powerful 8-level, 34-condition interrupt feature - Up to 16 external interrupts are supported - Automatic data transfer function independent of CPU - Expanded intelligent I/O service function (EI2OS) : up to 16 channels I/O ports - General-purpose input/output port (CMOS output) - 80 ports (for devices without an S suffix in the part number i.e. devices that support the sub clock) - 82 ports (for devices with an S suffix in the part number - i.e. devices that do not support the sub clock) 8/10-bit A/D converter - 16 channels (only for devices without a C suffix in the part number) - 24 channels (only for devices with a C suffix in the part number) - Resolution is selectable between 8-bit and 10-bit. - Activation by external trigger input is...