CY8C4146 Datasheet | Cypress

PSo C® 4: PSo C CY8C4146 FNI -S443 Datasheet Programmable System-on-Chip (PSo C) General Description PSo C® 4 is a scalable and reconfigurable platform architecture for a family of programmable embedded system controllers with an ARM® Cortex™-M0+ CPU. It bines programmable and reconfigurable analog and digital blocks with flexible automatic routing. The PSo C CY8C4146 FNI-S443 product family is a member of the PSo C 4 platform architecture. It is a bination of a microcontroller with standard munication and timing peripherals, a capacitive touch-sensing system (Cap Sense) with best-in-class performance, programmable general-purpose continuous-time and switched-capacitor analog blocks, and programmable connectivity. PSo C CY8C4146 FNI-S443 products will be upward patible with members of the PSo C 4 platform for new applications and design needs. Features 32-bit MCU Subsystem - 48-MHz ARM Cortex-M0+ CPU - Up to 64 KB of flash with Read Accelerator - Up to 8 KB of SRAM Programmable Analog - Two opamps with reconfigurable high-drive external and high-bandwidth internal drive and parator modes and ADC input buffering capability. Opamps can operate in Deep Sleep low-power mode. - 12-bit 1-Msps SAR ADC with differential and single-ended modes, and Channel Sequencer with signal averaging - Single-slope 10-bit ADC function provided by a capacitance sensing block - Two current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin - Two low-power parators that operate in Deep Sleep low-power mode Programmable Digital - Programmable logic blocks allowing Boolean operations to be performed on port inputs and outputs Low-Power 1.71-V to 5.5-V Operation - Deep Sleep mode with operational analog and 2.5-A digital system current Capacitive Sensing - Cypress Cap Sense Sigma-Delta (CSD) provides best-in-class signal-to-noise ratio (SNR) (>5:1) and water tolerance - Cypress-supplied software ponent makes capacitive sensing design easy - Automatic...