CMD257C4 - 6-10 GHz High IP3 I/Q Mixer

General Description

The CMD257C4 is a high IP3 I/Q mixer in a leadless surface mount package that can be used as either an image reject mixer or a single sideband upconverter.

The CMD257C4 utilizes two double balanced mixer cells and a 90 degree hybrid.

An external IF hybrid is needed to complete the image rejection.

Key Features

Low conversion loss.
High IP3.
Image rejection: 30 dB.
Wide IF bandwidth.
Pb-free RoHs compliant 4x4 mm SMT package.

📥 Download Datasheet

CMD257C4 6-10 ghz high ip3 i/q mixer by Custom MMIC - Datasheet Preview

Datasheet Details

Part number	CMD257C4
Manufacturer	Custom MMIC
File Size	253.84 KB
Description	6-10 GHz High IP3 I/Q Mixer
Datasheet	CMD257C4 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
CMD252C4	4GHz - 8GHz I/Q Mixer	qorvo
CMD259	AMPS A-Band Duplexer	CMT
CMD25N20	N-Channel 200V MOSFET	VBsemi
CMD204	SPST Non-reflective Switch	qorvo
CMD204C3	SPST Non-reflective Switch	qorvo

Other Datasheets by Custom MMIC

Part Number	Description
CMD251C3	4-8.5 GHz Fundamental Mixer
CMD252C4	4-8 GHz I/Q Mixer
CMD258C4	7.5-13 GHz High IP3 I/Q Mixer
CMD201P5	DC-20 GHz Distributed Power Amplifier
CMD213	30-40 GHz Active Frequency Doubler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

CMD257C4 6-10 GHz High IP3 I/Q Mixer Features ► Low conversion loss ► High IP3 ► Image rejection: 30 dB ► Wide IF bandwidth ► Pb-free RoHs compliant 4x4 mm SMT package Description The CMD257C4 is a high IP3 I/Q mixer in a leadless surface mount package that can be used as either an image reject mixer or a single sideband upconverter. The CMD257C4 utilizes two double balanced mixer cells and a 90 degree hybrid. An external IF hybrid is needed to complete the image rejection. The CMD257C4 is a much smaller alternative to higher cost hybrid image reject mixers and single sideband upconverter assemblies. Functional Block Diagram Electrical Performance - IF = 100 MHz, LO = +21 dBm , TA = 25 oC, F = 8 GHz Parameter Min Typ Max Frequency Range, RF & LO 6 - 10 Frequency Range, IF DC 3.