900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Crystek

CVHD-950 Datasheet Preview

CVHD-950 Datasheet

Ultra-Low Phase Noise Oscillators

No Preview Available !

CVHD-950 Model
9×14 mm SMD, 3.3V, CMOS
50 MHz HCMOS 3.3V
CCRV5YH0SDMT-E9H5Kz0
100 MHz HCMOS 3.3V
CCRV1Y0HS0DTM-E9H5Kz0
80 MHz HCMOS 3.3V
CCRV8YH0SDMT-E9H5Kz0
130 MHz HCMOS 3.3V
CCRV1Y3HS0DTM-E9H5Kz0
Model CVHD-950 is a 50 MHz to 130 MHz CMOS Voltage Controlled Crystal
Oscillator. High Q crystal and 3rd overtone technology provides Ultra-Low
Phase Noise and Low-Jitter performance with a CMOS output. Features include
-165 dBc/Hz phase noise floor with 3.3Vdc input voltage, -40°C to +85°C operating
temperature, and 9×14 mm SMT package. The oscillator has no sub-harmonics.
Applications include High Definition TV, Avionics
Low Phase Signal Sources, and Test and Measurement.
Rev: N
Date: 30-Jul-12
Page 1 of 2
CRYSTEK
CORPORATION
Downloaded from Elcodis.com electronic components distributor
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com




Crystek

CVHD-950 Datasheet Preview

CVHD-950 Datasheet

Ultra-Low Phase Noise Oscillators

No Preview Available !

CVHD-950 Model
9×14 mm SMD, 3.3V, CMOS
Frequency Range:
50 MHz to 130 MHz
Temperature Range:
0°C to +70°C (standard)
(Option M)
-20°C to +70°C
(Option X)
-40°C to +85°C
Storage:
-45°C to 90°C
Input Voltage:
3.3V ±0.3V
Input Current:
15mA Typical, 25mA Max
Output:
Symmetry:
Rise/Fall Time:
Logic:
Load:
Output Current:
Input:
CMOS
Typical Phase Noise:
45/55% Max @ 50%Vdd
1kHz -135 dBc/Hz
3nsec Max @ 20% to 80% Vdd
10kHz -155 dBc/Hz
“0” = 10% Vdd Max
100kHz -164 dBc/Hz
“1” = 90% Vdd Min
1MHz -165 dBc/Hz
15pF
±24mA Max
Mechanical:
Shock: MIL-STD-883, Method 2002, Condition B
Solderability: MIL-STD-883, Method 2003
Modulation Bandwidth: >10kHz @ -3dB
Impedance:
51 k
Vibration: MIL-STD-883, Method 2007, Condition A
Solvent Resistance: MIL-STD-202, Method 215
Resistance to Soldering Heat: MIL-STD-202, Method 210, Condition I or J
Control Voltage:
Tuning Sensitivity:
1.65V ±1.65V
+25ppm/V Typical
Environmental:
Thermal Shock: MIL-STD-883, Method 1011, Condition A
Frequency Pulling:
±20ppm APR Min
Moisture Resistance: MIL-STD-883, Method 1004
(Inclusive of frequency stability, calibration, and aging.)
Linearity:
±10% Max
Phase Jitter (12kHz~80MHz): 0.13psec Typical @100MHz
Phase Noise Floor:
-165dBc/Hz Typical, -160dBc/Hz Max
Sub-harmonics:
Aging:
None
<3ppm 1st year, <1ppm thereafter
Part Number Example: CVHD-950X-100.000 = 3.3V, 45/55, -40°C to +85°C (±20ppmAPR), 100 MHz
0.560
(14.2)
CRYSTEK
0.360 Part Number
(9.14) Frequency
Date Code
0.210
(5.3)
0.560
(14.2)
RECOMMENDED REFLOW SOLDERING PROFILE
260°C
217°C
Ramp-Up
3°C/Sec Max.
Critical
Temperature Zone
Ramp-Down
6°C/Sec.
200°C
150°C
0.040
(1.01)
12
43
0.070
(1.77)
0.200
(5.08)
SUGGESTED PAD LAYOUT
0.090
(2.28)
0.050
(1.27)
0.280
(7.11)
0.200
(5.08)
Preheat
180 Secs. Max.
8 Minutes Max.
90 Secs. Max.
260°C for
10 Secs. Max.
NOTE: Reflow Profile with 240°C peak also acceptable.
Pad Connection
1 Volt Cntrl.
2 GND
3 OUT
4 Vdd
Rev: N
Date: 30-Jul-12
Page 2 of 2
CRYSTEK
CORPORATION
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
Downloaded from Elcodis.com electronic components distributor


Part Number CVHD-950
Description Ultra-Low Phase Noise Oscillators
Maker Crystek
PDF Download

CVHD-950 Datasheet PDF






Similar Datasheet

1 CVHD-950 Ultra-Low Phase Noise Oscillators
Crystek





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy