P6KE350-G Datasheet | Comchip

600W Transient Voltage Suppressor SMD Diodes Specialist P6KE-G Series Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts Ro HS Device Features -Plastic package has underwriters laboratory flammability classification 94V-0 -600W, surge capability at 1m S. -Excellent clamping capability. -Low Zener impedance. -Fast response time: typically less than 1.0p S from 0 volt to BV min. -Typical IR less than 1μA above 10V. 1.000(25.40) MIN. DO-15 0.033(0.84) 0.027(0.71) 0.300(7.63) 0.230(5.85) Mechanical Data -Epoxy: UL 94V-0 rate flame retardant -Case: Molded plastic DO-15 -Terminals: Axial leads solderable per MIL-STD-202 , Method 208 -Polarity: Color band denotes positive end (cathode) -Weight: 0.4 gram (0.014oz.) 1.000(25.40) MIN. 0.142(3.61) 0.102(2.60) Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics Parameter Peak power dissipation with a 10/1000μs waveform (Note 1) Peak pulse current with a 10/1000μs waveform (Note 1) Power dissipation on infinite heatsink at TL=75 C Peak forward surge current, 8.3m S single half sine-wave unidirectional only (JEDEC method) (Note 2) Maximum instantantaneous forward voltage at 50 A for unidirectional only(Note 3) Operating junction and storage temperature range Symbol Value Unit IPP PD See Next Table 5.0 IFSM 3.5/5.0 TJ, TSTG -55 to +150 NTOES: O (1) Non-repetitive current pulse, per fig.5 and derated above TA=25 C per fig. 1 (2) Measured on 8.3ms single half sine-wave or equivalent square wave,equare wave,duty cycle=4 pulses per minute maximum (3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V REV:C QW-BTV06...