900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Coilcraft

CDF8000L Datasheet Preview

CDF8000L Datasheet

SMT Data Line EMI Filters

No Preview Available !

Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1289-1
SMT Data Line EMI Filters – CDF
• See our PDLF series for 4, 3 and 2-line EMI filters
• Exceptional common mode noise attenuation from 15 MHz
to 300 MHz; passes signal line data below 300 MHz with
minimal attenuation
• DC current capacity of 500 or 100 mA.
• Excellent electrical isolation – 300 Vrms
Core material Ferrite
Terminations  RoHS compliant tin-silver-copper over silver-platinum.
Other terminations available at additional cost.
Weight  330 – 345 mg
Ambient temperature  –40°C to +85°C
Storage temperature  Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF)  26,315,789 hours
Packaging  1000/13reel  Plastic tape: 16 mm wide, 0.46 mm thick,
12 mm pocket spacing, 4.5 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Common mode
Cutoff
Part
peak impedance
frequency2 Inductance DCR max4 Isolation5 Current6
number1
Lines (kOhms) (GHz) min (µH)3 (mOhms) (Vrms) (mAdc)
CDF8000L_
8
0.63 @ 37 MHz
0.053
5.0
250
300
100
CDF8500L_
8
0.52 @ 42 MHz
0.053
5.0
180
300
500
1. When ordering, please specify termination and packaging codes:
CDF 8500LD
Termination L = RoHS compliant tin-silver-copper over silver-platinum
Special order: S = non-RoHS tin-lead (63/37).
Packaging D = 13machine ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Frequency at which the differential mode attenuation equals −3 dB
3. Inductance shown for each winding, measured at 1 MHz
4. DCR is for each winding.
5. Interwinding isolation (hipot) tested for one minute.
6. Current rating is for each line.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.83,105max
8 7 6 5 9 10 11 12
0.83,105max
16 1 2 3 4 16 15 14 13
1 Note: Location of the wire slots
for parts manufactured
prior to August 2017
0.41,757max
may be different.
0.005 /0,13
1234
16
15
14
13
12 11 10 9
5
6
7
8
Dimensions
are in
inches
mm
0.050
1,27
0.260
6,6
0.260
6,6
16
1 0.043
0.055
1,1
1,4
Recommended
Land Pattern
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1289-1  Revised 09/12/17
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.




Coilcraft

CDF8000L Datasheet Preview

CDF8000L Datasheet

SMT Data Line EMI Filters

No Preview Available !

Document 1289-2
CDF8x00 Surface Mount Data Line EMI Filters
Attenuation (Ref: 50 Ohms)
0
CDF8000L
CDF8500L
Common mode
Differential mode
10
20
30
0.1
Impedance vs Frequency
10,000
1.0
1000
10
Frequency (MHz)
100
1000
100
10
1
0.1
0.1
1 10
Frequency (MHz)
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
CDF8000L
CDF8500L
Common mode
Differential mode
100 1000
Document 1289-2  Revised 09/12/17
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.


Part Number CDF8000L
Description SMT Data Line EMI Filters
Maker Coilcraft
PDF Download

CDF8000L Datasheet PDF






Similar Datasheet

1 CDF8000L SMT Data Line EMI Filters
Coilcraft





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy