0805USBF-672MRC Datasheet Text
Document 1270-1
Low Profile USB mon Mode Choke 0805
- For noise suppression in super high speed signal lines: USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
- Suitable for USB-type C specification 1.0
- Up to 6 GHz differential mode 3 dB cutoff frequency; up to
30 dB mon mode noise attenuation in GHz range Core material Ferrite Environmental RoHS pliant Terminations Matte tin over nickel over silver-platinum-glass frit. Weight 14.7
- 15.5 mg Ambient temperature
- 40°C to +125°C with Irms current. Maximum part temperature 140°C Storage temperature ponent:
- 40°C to +140°C. Tape and reel packaging:
- 40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7″ reel; 7500/13″ reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.295 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1 mon mode impedance typ (Ohms) 10 MHz 100 MHz 500 MHz mon mode attenuation typ (dB) Inductance2 DCR max3 Isolation Irms4 10 MHz 100 MHz 500 MHz min (nH) (Ohms) (Vrms) (mA)
0805USBF-421MR_ 0805USBF-901MR_ 0805USBF-172MR_ 0805USBF-262MR_ 0805USBF-372MR_
10 40 65 25 95 140 35 165 255 55 250 400 105 400 580
0.5 4.6 6.9 2.1 9.1 11.8 4.0 12.8 15.7 5.7 15.4 18.5 5.8 18.1 22.3
28 60 101 165 241
0.11 250 500 0.14 250 500...