0805USBF-421MRB Datasheet | Coilcraft

Document 1270-1 Low Profile USB mon Mode Choke 0805 - For noise suppression in super high speed signal lines: USB 3.x, HDMI 2.0, HDBase T™, Display Port, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc. - Suitable for USB-type C specification 1.0 - Up to 6 GHz differential mode 3 d B cutoff frequency; up to 30 d B mon mode noise attenuation in GHz range Core material Ferrite Environmental  Ro HS pliant Terminations  Matte tin over nickel over silver-platinum-glass frit. Weight  14.7 - 15.5 mg Ambient temperature  - 40°C to +125°C with Irms current. ­Maximum part temperature 140°C Storage temperature  ponent: - 40°C to +140°C. Tape and reel packaging: - 40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  2000/7″ reel; 7500/13″ reel;  Plastic tape:  8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.295 mm pocket depth PCB washing  Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 mon mode impedance typ (Ohms) 10 MHz 100 MHz 500 MHz mon mode attenuation typ (d B)   Inductance2  DCR max3 Isolation  Irms4 10 MHz 100 MHz 500 MHz min (n H) (Ohms) (Vrms) (m A) 0805USBF-421MR_ 0805USBF-901MR_ 0805USBF-172MR_ 0805USBF-262MR_ 0805USBF-372MR_ 1040 65 25 95140 35165 255 55250 400 105400 580 0.5 4.6 6.9 2.1 9.1 11.8 4.012.8 15.7 5.715.4 18.5 5.818.1 22.3 28 60 101 165 241 0.11 250500 0.14 250500 0.22 250500 0.235 250500 0.27 250500 0805USBF-502MR_ 0805USBF-672MR_ 0805USBF-902MR_ 145545 800 160 6701090 200 9001400 11.221.6 25.2 11.323.3 27.7 12.625.4 30.0 315 434 560 0.32 250500...