Datasheet4U Logo Datasheet4U.com

NAS1309 - (NAS1303 / NAS1316) Bolt

Download the NAS1309 datasheet PDF. This datasheet also covers the NAS1303 variant, as both devices belong to the same (nas1303 / nas1316) bolt family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (NAS1303_CoastFabrication.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number NAS1309
Manufacturer Coast Fabrication
File Size 531.37 KB
Description (NAS1303 / NAS1316) Bolt
Datasheet download datasheet NAS1309 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NAS1305-17 BOLT Military Fasteners
NAS1329 (NAS1329 / NAS1330) Blind Revet Nuts ETC
NAS1330 (NAS1329 / NAS1330) Blind Revet Nuts ETC
NAS1351 (NAS1352) Socket Head Cap Screws GAH
NAS1351-04-6 Socket Cap Screws Fastenal

Other Datasheets by Coast Fabrication

Part Number Description
NAS1303 (NAS1303 / NAS1316) Bolt
NAS1304 (NAS1303 / NAS1316) Bolt
NAS1305 (NAS1303 / NAS1316) Bolt
NAS1306 (NAS1303 / NAS1316) Bolt
NAS1307 (NAS1303 / NAS1316) Bolt

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
20 NAS 1303 - NAS 1316 Series Specifications Bolt, Hex Head, Close Tolerance 160,000 PSI Tensile HEAD MARKING: BASIC PART NO., APPLICABLE DASH NO., AND MANFACTURER’S TRADEMARK RAISED OR DEPRESSED .010 MAX. LOCATION OPTIONAL POINT SHALL BE FLAT AND CHAMFERED. CHAMFER U. CHAMFER PLUS INCOMPLETE THREADS NOT TO EXCEED TWO PITCHES (d) DRILL P WHEN SPECIFIED BY PART NO, CSK OPTIONAL CHAMFER 15O TO C OPTIONAL DRILL N (3 HOLES) WITHIN .010 OF CENTER OF HEX FLAT WHEN SPECIFIED BY PART NO. LOCK WIRE HOLES MUST BE FREE FROM BURRS AND SHARP EDGES. THREAD PER MIL-S-7742, EXCEPT MAJOR DIA TO BE .001 BELOW MIN SHANK DIA.