NAS1306 - (NAS1303 / NAS1316) Bolt

This page provides the datasheet information for the NAS1306, a member of the NAS1303 (NAS1303 / NAS1316) Bolt family.

Coast Fabrication

Datasheet Details

Part number	NAS1306
Manufacturer	Coast Fabrication
File Size	531.37 KB
Description	(NAS1303 / NAS1316) Bolt
Datasheet	NAS1306 Datasheet
Additional preview pages of the NAS1306 datasheet.

📁 Similar Datasheet

NAS1305-17 - BOLT (Military Fasteners)
NAS1329 - (NAS1329 / NAS1330) Blind Revet Nuts (ETC)
NAS1330 - (NAS1329 / NAS1330) Blind Revet Nuts (ETC)
NAS1351 - (NAS1352) Socket Head Cap Screws (GAH)
NAS1351-04-6 - Socket Cap Screws (Fastenal)
NAS1351-06-10 - Socket Cap Screws (Fastenal)
NAS1351-06-4 - Socket Cap Screws (Fastenal)
NAS1351-08-10 - Socket Cap Screws (Fastenal)
NAS1351-08-12 - Socket Cap Screws (Fastenal)
NAS1351-3-10 - Socket Cap Screws (Fastenal)

Other Datasheets by Coast Fabrication

NAS1303 - (NAS1303 / NAS1316) Bolt
NAS1304 - (NAS1303 / NAS1316) Bolt
NAS1305 - (NAS1303 / NAS1316) Bolt
NAS1307 - (NAS1303 / NAS1316) Bolt
NAS1308 - (NAS1303 / NAS1316) Bolt
NAS1309 - (NAS1303 / NAS1316) Bolt
NAS1310 - (NAS1303 / NAS1316) Bolt
NAS1312 - (NAS1303 / NAS1316) Bolt

Full PDF Text Transcription

Click to expand full text

20 NAS 1303 - NAS 1316 Series Specifications Bolt, Hex Head, Close Tolerance 160,000 PSI Tensile HEAD MARKING: BASIC PART NO., APPLICABLE DASH NO., AND MANFACTURER’S TRADEMARK RAISED OR DEPRESSED .010 MAX. LOCATION OPTIONAL POINT SHALL BE FLAT AND CHAMFERED. CHAMFER U. CHAMFER PLUS INCOMPLETE THREADS NOT TO EXCEED TWO PITCHES (d) DRILL P WHEN SPECIFIED BY PART NO, CSK OPTIONAL CHAMFER 15O TO C OPTIONAL DRILL N (3 HOLES) WITHIN .010 OF CENTER OF HEX FLAT WHEN SPECIFIED BY PART NO. LOCK WIRE HOLES MUST BE FREE FROM BURRS AND SHARP EDGES. THREAD PER MIL-S-7742, EXCEPT MAJOR DIA TO BE .001 BELOW MIN SHANK DIA.

Published: Jan 21, 2014 |