CM10S1525 Datasheet | Clare

Molded Mini-DYAD™ CM10 - - - - - - - - - Features Small size SMT-patible Easily formed leads Sputtered ruthenium contacts Hermetically sealed contacts Fast switching speed - up to 500Hz Wide range of available magnetic sensitivities Superior mechanical strength Enhanced for better auto placement Applications - Security - Proximity sensing - Smoke alarms - Automotive - Level sensor - Lamp current sensor - Relays Description Clare's Molded Mini DYAD dry reed switches are ideally suited for small switching signal applications. This switch has sputtered tuthenium contacts and an extraordinary seal strength, achieved by a patented laser sealing of the glass. In a low level or dry switching environments, both switches typically provide >1 billion operations. The switches have hermetically sealed contacts and offer a wide range of available magnetic sensitivities. In addition, the molding process provides a solid plastic outer shell. This plastic shell provides superior mechanical strength, eliminates concerns over handling glass switches, and provides an ideal solution for high speed, automated assembly environments. Ordering Information A plete part number is represented by the digits to the right. For example, CM10S2030 is a MOLDED MINIDYAD™ with a minimum operate value of 10NI and a maximum of 30NI. Refer to the switch operating specification charts for available ranges. Special ranges are available upon request. CM10 S XX XX "S" for straight switch blank for SMT Maximum operate value Minimum operate value Surface Mount Molded Mini-DYAD Refer to operating characteristics table for plete part number. Standard Test Coil The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to close is called the pull-in or operate value. Molded Mini-DYADTM Part # CM10S1015 CM10S1020 CM10S1030 CM10S1520 CM10S1525 CM10S2025 Operate Range (NI)1 10 to 15 10 to 20 10 to 30 15 to 20 15 to 25 20 to 25 CM10 Part # Coil definition...