CS5462 Datasheet | Cirrus Logic

Features - Single-chip Power Measurement Solution - Energy Data Linearity: ±0.1% of Reading over 1000:1 Dynamic Range - On-chip functions: Measures Energy and Performs Energy-to-Pulse Conversions - Meets Accuracy Spec for IEC 687/1036 - On-chip System Calibration Option - High-pass Filter Option for Both I and V - 2 Available Current Input Ranges - On-chip 2.5 V Reference (25 ppm/°C typ) - Pulse Outputs for Stepper Motor or Mechanical Counter - On-chip Energy Direction Indicator - Ground Reference Input Signals with Single Supply - High-frequency Output for Calibration - On-chip Power-on Reset - Power Supply Configurations: VA+ = +5 V; AGND = 0 V; VD+ = +3.3 V to 5 V Description The CS5462 is a low-cost power meter solution bining two  analog-to-digital converters ADCs), an energy-to-frequency converter, and energy pulse outputs on a single chip. It is designed to accurately measure and calculate energy for single-phase 2- or 3wire power metering applications with minimal external ponents. Low-frequency energy outputs, E1 and E2, supply average real power and can be used to drive a stepper motor or a mechanical counter; the high-frequency energy output FOUT can be used for calibration; and NEG indicates negative power. The CS5462 has configuration pins which allow for direct configuration of pulse output format, pulse output frequency, current channel input range, high-pass filter option, and on-chip calibration. The CS5462 also has a power-on reset function which holds the part in reset until the supply reaches an operable level. ORDERING INFORMATION: See page 16. IIN+ IIN- VIN+ VIN- VREFIN VREFOUT VA+ RESET VD+ / P7 PGA x10,x50 4th Order  Modulator x10 2nd Order  Modulator x1 Digital Filter Digital Filter High Pass...