Datasheet4U Logo Datasheet4U.com

HWD4863 - Dual 2.2W Audio Amplifier

Description

TheHWD4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4Ω load (Note 1) or 2.5W to a 3Ω load (Note 2) with less than 1.0% THD+N.

Features

  • an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce “clicks and pops” during device turn-on. Note 1: AnHWD4863MTE or HWD4863LQ that has been properly mounted to a circuit board will deliver 2.2W into 4Ω. The other package options for the HWD4863 will deliver 1.1W into 8Ω. See the.

📥 Download Datasheet

Datasheet preview – HWD4863

Datasheet Details

Part number HWD4863
Manufacturer Chengdu Sino Microelectronics System
File Size 3.49 MB
Description Dual 2.2W Audio Amplifier
Datasheet download datasheet HWD4863 Datasheet
Additional preview pages of the HWD4863 datasheet.

📁 Similar Datasheet

  • HWD481 - Slew-Rate-Limited RS-485/RS-422 Transceivers (ETC)
  • HWD483 - Slew-Rate-Limited RS-485/RS-422 Transceivers (ETC)
  • HWD484 - (HWD481 - HWDxxx) Slew-Rate-Limited RS-485/RS-422 Transceivers (ETC)
  • HWD487 - (HWD481 - HWDxxx) Slew-Rate-Limited RS-485/RS-422 Transceivers (ETC)
  • HWD488 - (HWD481 - HWDxxx) Slew-Rate-Limited RS-485/RS-422 Transceivers (ETC)
  • HWD489 - Slew-Rate-Limited RS-485/RS-422 Transceivers (ETC)
  • HWD490 - Slew-Rate-Limited RS-485/RS-422 Transceivers (ETC)
  • HWD491 - Slew-Rate-Limited RS-485/RS-422 Transceivers (ETC)
  • HWD-24050-3L - DC-DC Converter Modules (GROUP-TEK)
  • HWD075DGE - HWD Series . 75 Watt/ Half-Brick DC/DC Converter Wide Input Range Dual Output (Power-One)
Other Datasheets by Chengdu Sino Microelectronics System
  • HWD4558 - Dual Operational Amplifiers
  • HWD803 - 3-Pin Microprocessor Reset Circuits
  • HWD809 - 3-pin microprocessor power monitoring
  • HWD809 - 3-Pin Microprocessor Reset Circuits
  • HWD810 - 3-Pin Microprocessor Reset Circuits

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com HWD4863 Dual 2.2W Audio Amplifier Plus Stereo Headphone Function HWD4863 Dual 2.2W Audio Amplifier Plus Stereo Headphone Function General Description TheHWD4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4Ω load (Note 1) or 2.5W to a 3Ω load (Note 2) with less than 1.0% THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones. Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external components. To simplify audio system design, theHWD4863 combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip.
Published: |