PS9317L Datasheet | California Eastern Labs

DESCRIPTION The PS9317L and PS9317L2 are optical coupled high-speed, active low type isolators containing a Ga Al As LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9317L and PS9317L2 are designed specifically for high mon mode transient immunity (CMR) and low pulse width distortion. The PS9317L is lead bending type (Gull-wing) for surface mounting. The PS9317L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES - Pulse width distortion (⏐t PHL - t PLH⏐ = 35 ns MAX.) - High mon mode transient immunity (CMH, CML = ±15 k V/μs MIN.) - Half size of 8-pin DIP - Long creepage distance (8 mm MIN. : PS9317L2) - High-speed (10 Mbps) - High isolation voltage (BV = 5 000 Vr.m.s.) - Open collector output - Pb-Free product <R> - Safety standards - UL approved: File No. E72422 - CSA approved: No. CA 101391 - DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40024069 (Option) 1 2 3 6 PIN CONNECTION (Top View) 5 4 1. Anode 2. NC 3. Cathode 4. GND 5. VO 6. VCC APPLICATIONS - Measurement equipment - PDP - FA Network TRUTH TABLE LED ON OFF Output L H Document No. PN10690EJ02V0DS (2nd edition) Date Published August 2008 NS The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2007, 2008 PS9317L,PS9317L2 PACKAGE DIMENSIONS (UNIT: mm) Lead Bending Type (Gull-wing) For Surface Mount 4.58±0.25 (0.82) 6.8±0.25 9.7±0.3 7.62 0.2±0.15 0.25±0.15 3.7±0.25 3.5±0.2 1.27 0.4±0.1 0.25 M 0.8±0.25 Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount PS9317L2 4.58±0.25...