Datasheet4U Logo Datasheet4U.com

CX7508 - High Precision CC/CV Primary-Side PWM Power Switch

General Description

CX7508 is a high performance offline PWM power switch for low power AC/DC charger and adapter applications.It operates in primary-side sensing and regulation.Consequently, opto-coupler and TL431 could be eliminated.

Key Features

  • including Cycle-by-Cycle current limiting, VDD Over Voltage Protection (VDD OVP), short circuit protection, built-in leading edge blanking, VDD under voltage lockout (UVLO), OTP, etc. High precision constant voltage (CV) and constant current (CC) can be achieved by CX7508. CX7508 is offered in DIP7 package.

📥 Download Datasheet

Datasheet Details

Part number CX7508
Manufacturer CXW
File Size 1.93 MB
Description High Precision CC/CV Primary-Side PWM Power Switch
Datasheet download datasheet CX7508 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CX7509 High-performance low-power switching power supply controller CHENGXINWEI
CX713 PSR CC/CV chip ETC
CX7131 High-precision primary-side feedback switching PowerSupply Chengxin
CX74002 Silicon Germanium CDMA Transmit/Dual PLL RFlC ETC
CX74017 On the Direct Conversion Receiver ETC

Other Datasheets by CXW

Part Number Description
CX7501 Quasi-Resonant PSR CC/CV PWM Power Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CX7508 High Precision CC/CV Primary-Side PWM Power Switch GENERAL DESCRIPTION CX7508 is a high performance offline PWM power switch for low power AC/DC charger and adapter applications.It operates in primary-side sensing and regulation.Consequently, opto-coupler and TL431 could be eliminated. High Precision Constant Voltage (CV) and Constant Current (CC) control are integrated as shown in the figure below. In CC control, the current and output power setting can be adjusted externally by the sense resistor Rs at CS pin. In CV control, multi-mode operations are utilized to achieve high performance and high efficiency. In addition, good load regulation is achieved by the built-in Cable Drop Compensation.