DFBR1F5210S01CthTruTHDRBU1F5R7SF2007CT
®
Isolated 20.0 AMPS. Glass Passivated Fast Recovery Rectifiers
Features
Glass passivated chip junction.
High efficiency, Low VF
High current capability
High reliability
High surge current capability
Low power loss
ITO-220AB
.406(10.3)
.381(9.7)
.134(3.4)
.118(3.0)
Unit : inch (mm)
.189(4.8)
.165(4.2)
.130(3.3)
.098(2.5)
Mechanical Data
Cases: ITO-220AB molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Pure tin plated, Lead free. Leads
solderable per MIL-STD-202, Method 208
guaranteed
Polarity: As marked
High temperature soldering guaranteed:
260 oC /10 seconds 0.25”,(6.35mm) from
case.
Mounting position: Any
Weight: 2.24 grams
Mounting torque: 5 in – 1bs. max.
.063(1.6)
.047(1.2)
.055(1.4)
.039(1.0)
.035(0.9)
.011(0.3)
.1
(2.55)
.1
(2.55)
.114(2.9)
.098(2.5)
.032(.8)
MAX
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol FRF FRF FRF FRF FRF FRF FRF Units
2001CT 2002CT 2003CT 2004CT 2005CT 2006CT 2007CT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
See Fig. 1
I(AV)
20.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
IFSM
180
A
Maximum Instantaneous Forward Voltage
@ 10A
VF
1.3 V
Maximum DC Reverse Current @ TC=25 oC
at Rated DC Blocking Voltage @ TC=125 oC
IR
5.0 uA
100 uA
Maximum Reverse Recovery Time ( Note 1) Trr
150
250 500
nS
Typical Junction Capacitance (Note 3)
Cj
50 pF
Typical Thermal Resistance (Note 2)
RθJC
5.0
Operating and Storage Temperature Range TJ ,TSTG
-65 to +150
Notes:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
2. Thermal Resistance from Junction to Case Per Leg Mounted on Heatsink
Size 2” x 3” x 0.25” Al-Plate.
3. Measured at 1MHz and Applied Reverse Voltage of 4.0 Volts D.C.
oC/W
oC
MAR-14,2006,REV.3
CUMSUMI SEMICONDUCTOR INTERNATIONAL
® www.cumsumi.com
1/2
