FR101S THRU FR107S
FAST RECOVERY RECTIFIERS
Reverse Voltage – 50 to 1000 Volts
Forward Current – 1.0 Ampere
Features
A-405
• High Current Capability
• Fast switching for high efficiency
• Exceeds Environmental Standards of MIL-S-19500/228
• 1 ampere operation at TA = 55oC with no thermal runaway
• Low Leakage.
®
Unit: inch(mm)
.025(.64)
.021(.53)
Mechanical Data
• Case: Molded plastic, A-405
• Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed.
• Polarity: Color band denotes cathode end
• Mounting Position: Any
.107(2.7)
.080(2.0)
Absolute Maximum Ratings and Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified, single phase, half wave, 60Hz, resistive or inductive load, for
capacitive load, derate current by 20%.
Symbols FR101S FR102S FR103S FR104S FR105S FR106S FR107S Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Average forward rectified current .375” (9.5mm)
lead length at TA = 55 OC
Peak forward surge current
VRRM
VRMS
VDC
I(AV)
50 100 200 400 600 800 1000 Volts
35 70 140 280 420 560 700 Volts
50 100 200 400 600 800 1000 Volts
1 Amp
8.3mS single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
30 Amps
Maximum forward voltage
at 1A DC and 25oC
VF
1.3 Volts
Maximum reverse current
TA = 25℃
at rated DC blocking voltage
TA = 100℃
Maximum reverse recovery time (Note 1)
Typical junction capacitance (Note 2)
Typical thermal resistance (Note3)
Operating and storage temperature range
IR
Trr
CJ
RΘJA
TJ ,TS
5
500
150 250
12
67
-65 to +125
µA
500 nS
pF
℃/W
℃
1) Reverse recovery test conditions: IF = 0.5A, IR = 1A, Irr = 0.25A.
2) Measured at 1MHZ and applied reverse voltage of 4 VDC .
3) Thermal resistance junction to ambient and form junction to lead at 0.375” (9.5mm) lead length P.C.B. mounted.
MAR-14,2006,REV.3
CUMSUMI SEMICONDUCTOR INTERNATIONAL
® www.cumsumi.com
1/2
