Datasheet4U Logo Datasheet4U.com

CS1550BL - CURRENT SENSOR

Download the CS1550BL datasheet PDF. This datasheet also covers the CS1050BL variant, as both devices belong to the same current sensor family and are provided as variant models within a single manufacturer datasheet.

Description

CURRENT SENSOR

Features

  • open loop.
  • bipolar.
  • low noise.
  • single channel date 09/05/2019 page 1 of 4 MODEL CS0350BL rated current (If) (ARMS) ±3 linearity range1 (Im) (APEAK) ±4.5 CS0550BL ±5 ±7.5 CS1050BL ±10 ±15 CS1550BL ±15 ±22.5 CS2050BL ±20 ±30 Notes: 1. Im is the maximum peak current for which the output voltage specifications are guaranteed, however the If RMS rating must not be exceeded. 1. All specifications measured at 25°C, Rl=10 kΩ, unless.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (CS1050BL-CUI.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number CS1550BL
Manufacturer CUI
File Size 323.97 KB
Description CURRENT SENSOR
Datasheet download datasheet CS1550BL Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS15-E2GA472MYNS Disk Ceramic Capacitors TDK
CS1501 Digital Power Factor Correction Controller Cirrus Logic
CS1501-7R 100 Watt DC-DC Converters Power-One
CS150N03 Silicon N-Channel Power MOSFET Huajing
CS150N03A8 Silicon N-Channel Power MOSFET Huajing

Other Datasheets by CUI

Part Number Description
CS1505U CURRENT SENSOR
CS1005U CURRENT SENSOR
CS1050BL CURRENT SENSOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Additional Resources: Product Page | 3D Model | PCB Footprint SERIES: CSXX50BL │ DESCRIPTION: CURRENT SENSOR FEATURES • open loop • bipolar • low noise • single channel date 09/05/2019 page 1 of 4 MODEL CS0350BL rated current (If) (ARMS) ±3 linearity range1 (Im) (APEAK) ±4.5 CS0550BL ±5 ±7.5 CS1050BL ±10 ±15 CS1550BL ±15 ±22.5 CS2050BL ±20 ±30 Notes: 1. Im is the maximum peak current for which the output voltage specifications are guaranteed, however the If RMS rating must not be exceeded. 1. All specifications measured at 25°C, Rl=10 kΩ, unless otherwise noted. 2. It is recommended to add a 1 μF capacitor connected between the common terminal 4 and the +5 V and -5 V terminals, 1 and 2, to avoid noise problems.
Published: |