CTP17B Datasheet | CT Micro

Features - High isolation 2500 VRMS - Patented coplanar structure DMC-Isolator® - Various CTR selection available - DC input with Transistor output - Operating Temperature range - 55 °C to 125 °C - Leadless - Ro HS and REACH pliance - Halogen Free pliance - External creepage distance >2.8mm - Distances through insulation >0.4mm - Regulatory Approvals - UL - UL1577 (E364000) - VDE - EN60747-5-5 CTP17 Series DC 4-Pin DFN DMC-Isolator® Phototransistor Optocoupler The CTP17 series consists of a photo transistor optically coupled to an Infrared-emitting diode in a DFN DMC-Isolator® package. Applications - Switch mode power supplies - puter peripheral interface - Microprocessor system interface Description Package Outline Schematic © 2022 CT MICRO INTERNATIONAL CORPORATION ALL RIGHTS RESERVED. Page 1 Rev.2 Aug, 2022 .ct-micro. CTP17 Series DC 4-Pin DFN DMC-Isolator® Phototransistor Optocoupler Absolute Maximum Ratings TA = 25°C, unless otherwise specified Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. In addition, extended exposure to stresses above the remended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameters VISO Isolation voltage (AC, 1 minute, 40 ~ 60% R.H.) PTOT Total power dissipation TOPR Operating temperature TSTG Storage temperature TSOL Soldering...