MVS2 Datasheet | CP Clare

DESCRIPTION CP Clare’s epoxy molded DIP 14 Series offers a variety of contacts and schematics to meet the needs of a wide range of applications. It features the MVS2/MVS7 models designed for high reliability. The MSS2/7 DIPs are 1 form A relays equipped with the MYAD® all-position mounting switch. With switching up to 50 Watts and a 4000V isolation option, the DIP 14 Series is a relay package that allows for automatic insertion directly on PCBs as well as insertion into standard 14 pin DIP sockets. FEATURES s All position mercury contacts on some models s Stable contact resistance over life s 4000 Vac input-output isolation s Bounce free operation s High insulation resistance s Switching speed of 300 Hz s Long life > 1 billion operations s Epoxy molded for automatic board processing APPLICATIONS s Automatic test equipment s Process control s Industrial s Tele s Data s High-end security systems s Signaling s Metering APPROVALS s UL approval (DSS7 & PRMA) s BSI approval (DSS7 & MSS7) s BS EN 60950 approval (MVS7) s CSA approval (PRMA) s FCC68 approval (MSS2 & MSS7) RATINGS @ 25°C Parameter Min Typ Max Unit Switching Voltage PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7 MVS2/MVS7 200 Volts 100 Volts 500 Volts 1000 Volts Switching Current PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7/MVS2/MVS7 0.5 Amps 0.25 Amps 2 Amps Carry Current PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7 MVS2/MVS7 2 Amps 0.4 Amps 3 Amps 3 Amps Switching Frequency PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7/MVS2/MVS7 500 Hz 50 Hz 200 Hz Contact Resistance PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7/MVS2/MVS7 150 200 100 (See detailed specifications for more information.) mΩ mΩ mΩ 1-800-CP CLARE DIP 14 SERIES REED RELAYS MSS2 s MSS7 s PRMA s DSS7 s PRME s MVS2 s MVS7 SPECIFICATIONS All parameters are at 25°C unless otherwise stated. Operate voltage, release voltage, and coil resistance will change approximately 0.4%/°C as ambient temperature varies. MSS2 Molded 8-pin All position Wetted contacts MSS7 Molded 4-pin...