KL197T01 Datasheet | COSMO Electronics

Features Package: 1.6x0.8x0.6mm(0603) standard package Feature of the device: extremely wide viewing angle; ideal for backlighting and coupling in light guides Wavelength: 640nm(red),573nm(Yellow green), 470nm(blue) Viewing angle: Extremely Wide( 130∘) Grouping parameter: luminous intensity Assembly methods: suitable for all SMT assembly methods Soldering methods: IR reflow soldering Taping: Package in 8mm tape on 7” diameter reel Package Dimensions PRODUCT SPECIFICATION DATE: 05/20/2004 NO. 61L03001 SHEET 2 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : Absolute Maximum Ratings At Ta = 25˚C Parameter R Power Dissipation 72 Peak Forward Current 100 (1/10 Duty Cycle, 0.1ms Pulse Width) Forward Current Reverse Voltage Operating Temperature Range Storage Temperature Range Wave Soldering Condition 30 5 -25˚C ~+ 80˚C -30˚C ~+ 85℃ 240˚C For 10 Seconds m A V m A 72 80 KL-197T01 YG B m W Unit PRODUCT SPECIFICATION DATE: 05/20/2004 NO. 61L03001 REV. 1 SHEET 3 OF 9 cosmo ELECTRONICS CORPORATION SMD LED : Electrical & Optical Characteristics At Ta = 25˚C Parameter Luminous Intensity Viewing Angle Red Blue Yellow Green Symbol PART NO Min. Typ. Max. Unit 60 30 30 2θ 1/2 Red/Blue/ Yellow Green Red Blue Yellow Green Red Spectral Line Half-Width Δλ Blue Yellow Green Forward Voltage VF Red Blue Yellow Green Red/Blue/ Yellow Green 80 50 50 130 630 475 570 20 30 20 2.1 3.6 2.2 2.6 4.0 2.6 V IF = 20m A nm nm deg Test Condition IF = 20m A Note 1 Note 2 IF = 20m A Note 3 Iv KL-197T01 mcd Dominant Wavelength λd Reverse Current Note : Ir 100 μ A VR = 5V 1. Luminous intensity is measured with a photo detector and filter bination that follows the CIE ete - response curve. And the equipment measured luminous intensity torellance is ±5%. 2. θ1/2 is the off - axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the color of the device....