Datasheet4U Logo Datasheet4U.com

CN3153 - 1A Lithium Battery Charger IC

Description

The CN3153 is a complete constant-current /constant voltage linear charger for single cell lithium rechargeable battery.

The device contains an on-chip power MOSFET and eliminates the need for the external current sense resistor and blocking diode.

Features

  • include under-voltage lockout, automatic recharge and charging/termination indicator. The CN3153 is available in thermally enhan.

📥 Download Datasheet

Datasheet preview – CN3153

Datasheet Details

Part number CN3153
Manufacturer CONSONANCE
File Size 153.83 KB
Description 1A Lithium Battery Charger IC
Datasheet download datasheet CN3153 Datasheet
Additional preview pages of the CN3153 datasheet.

📁 Similar Datasheet

  • CN3051 - battery charger (ETC)
  • CN3052 - battery charger (ETC)
  • CN30A110 - Optimum DC-DC Power Module (TDK)
  • CN3302 - PFM boost-type dual-cell lithium battery charging controller (ChipSourceTek)
  • CN3903 - 36V/3.5A 500KHz Synchronous Step-Down Converter (Chipnet)
  • CN3A - CELL RECTIFIER DIODES (EIC discrete Semiconductors)
  • CN3B - CELL RECTIFIER DIODES (EIC discrete Semiconductors)
  • CN3D - CELL RECTIFIER DIODES (EIC discrete Semiconductors)
  • CN3G - CELL RECTIFIER DIODES (EIC discrete Semiconductors)
  • CN3J - CELL RECTIFIER DIODES (EIC discrete Semiconductors)
Other Datasheets by CONSONANCE
  • CN3153B - 500mA Lithium Battery Charger IC
  • CN3152 - 1A Lithium Battery Charger IC
  • CN3155 - 1A Lithium Titanate Battery Charger IC
  • CN3162 - 1A Lithium Battery Charger IC
  • CN3002 - 5A dual-cell lithium battery charger
  • CN301 - Ultra Low Power Battery Monitor
  • CN3018 - 1 amp lithium battery charger
  • CN302 - Low Power Battery Monitor

Full PDF Text Transcription

Click to expand full text
CONSONANCE 1A Lithium Battery Charger IC CN3153 General Description: The CN3153 is a complete constant-current /constant voltage linear charger for single cell lithium rechargeable battery. The device contains an on-chip power MOSFET and eliminates the need for the external current sense resistor and blocking diode. Its low external component count makes CN3153 ideally suited for portable applications. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The regulation voltage is internally fixed at 4.2V, it can also be adjusted with an external resistor. The charge current can be programmed externally with a single resistor.
Published: |