Transient Voltage Suppressors
Chip Integration Technology Corporation
30KPA Series
30000W Leaded Type Transient Voltage Suppressors
VOLTAGE : 28 TO 288Volts
Features
• Axial lead type devices for through hole design.
• 30000W peak pulse power capability with a 10/1000ìS
waveform, repetition rate (duty cycle): 0.05%.
• Excellent clamping capability.
• Low incremental surge resistance.
• Suffix "G" indicates Halogen-free part, ex.30KPA28(C)AG.
• Ultra high-speed switching.
• Glass passivated chip junction.
• Lead-free parts meet environmental standards of
MIL-STD-19500 /228
Mechanical data
Outline
R-6(P600)
.360(9.10)
.340(8.60)
1.0(25.4)
MIN.
.360(9.10)
.340(8.60)
• Epoxy:UL94-V0 rated flame retardant
• Case : Molded plastic, R-6 / P600
• Lead : Axial leads, solderable per MIL-STD-202,
Method 208 guaranteed
• Polarity : Color band denotes cathode end
• Mounting Position : Any
• Weight : Approximated 2.10 gram
.052(1.32)
.048(1.22)
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Parameter
Peak power dissipation
Peak forward surge current
Steady state power dissipation
Peak pulse current
Operating temperature
Storage temperature
Conditions
with a 10/1000us waveform, note 1& fig.1
8.3ms single half sine-wave superimposed on
rate load (JEDEC method), note 3
at 75OC, lead length 0.375"(9.5mm), note 2
with a 10/1000us waveform, note 1& fig.1
Symbol
PPPM
IFSM
P M(AV)
IPPM
TJ
TSTG
30KPA series
30000
400
8.0
See Table 1
-55 ~ +150
-65 ~ +150
UNIT
W
A
W
A
OC
OC
http://www.citcorp.com.tw/
TEL:886-3-6565228
FAX:886-3-6565091
1
Document ID : DS-21T17
Issued Date : 2010/05/05
Revised Date : 2010/10/08
Revision : B
