MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
400 to 450Vdc, long life, 105℃
KXLSeries
KXJ
Downsized
・Ideal for low profile power supply applications
・Downsizing from KXJ series
・Rated voltage range : 400 to 450Vdc, Capacitance range : 15 to 150µF
・Endurance with ripple current : 10,000 to 12,000 hours at 105℃
・Non solvent resistant type
・RoHS2 Compliant
KXL
Longer life
KWA
◆SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tan )
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-40 to +105℃
400 to 450Vdc
±20% (M)
(at 20℃, 120Hz)
I=0.04CV+100 (after 1 minute)
I=0.02CV+25 (after 5 minutes)
Where, I : Max. leakage current(µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃)
Rated voltage (Vdc)
400 to 450V
tanδ (Max.)
0.24
(at 20℃, 120Hz)
Rated voltage (Vdc)
400 to 450V
Z(-25℃)/Z(+20℃)
6
Z(-40℃)/Z(+20℃)
10
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 12,000 hours (10,000 hours for 20L) at 105℃.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦500% of the initial specified value
◆DIMENSIONS [mm]
●Terminal Code : E
φ10
Sleeve (PET : Brown)
Vent
L'
≧φ12.5
Sleeve (PET : Brown)
15min.
4min.
(φ10)
Gas escape end seal
φD 10 12.5 14.5 16 18
φd 0.6 0.6 0.8 0.8 0.8
F 5.0 5.0 7.5 7.5 7.5
φD' φD+0.5 max.
L' L+2.0 max.
Vent
L'
15min.
4min.
(φ12.5 to φ18)
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KXL AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470,100µF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 400V:401,450V:451)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001T
