CME8000
RC-Module
C-MAX
evaluation that this module is applied on, the part number for ordering differs. (For detail see
part-numbering and ordering section).
This module has pin outs for all available pins on the receiver IC CME8000. Via easy
interface with a separate MCU, the module can readily receive, recognize and decode to
digital form the selected long wave signal received via the antenna. Output of the decoded
stream of digital data is available on the DATA pin of the module and can be fed into the
MCU for translation into time information necessary for the intended application.
3. Dimensions & Outline of Module
No external components
related to the CME8000
receiver IC are
necessary. This module
needs only to be
interfaced to a MCU for
radio control
functionality.
4. Pinning
Symbol
ANT2
Function
Antenna switch 2
IN2 Input antenna
IN1
ANT1
Input antenna
Antenna switch 1
VCC
SPEC No.
CMMR-8D
Analog part supply voltage
Revision
A7
State
29.10.08
Remark
Antenna connection for 60kHz. Capacitor space CM for
capacitor to match connection between ANT2 and IN1 for
60kHz.
Antenna connection for 40kHz and 77.5kHz. Capacitor
space CH for capacitor to match connection between IN1
and IN2 for 77.5kHz
Antenna connection for 60kHz and 77.5kHz
Antenna connection for 40kHz. Capacitor space CL for
capacitor to match connection between ANT1 and IN2 for
40kHz.
Separate power supply to analog part
C-MAX printed
29.10.2008
Version
English
Page
2 of 6