UBQ10A05L04
UBQ10A05L04 is Electrostatic Discharged Protection Devices manufactured by Brightking.
Description
UBQ10A05L04 is a ultra low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive ponents which are connected to high-speed data and transmission lines from over-voltage caused by electrostatic discharge (ESD), cable discharge events (CDE), and electrical fast transients (EFT). It has a typical capacitance of only 0.5p F between I/O pins. This allows it to be used on circuits operating in excess of 3GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC61000-4-2, Level 4 (±15kv air, ±8kv contact discharge). They are designed for easy PCB layout by allowing the traces to run straight through the device.The bination of small size,low capacitance,and high level of ESD protection makes them a flexible solution for applications such as HDMI, UDI, Display Port TM, MDDI, Serial ATA and Infiniband circuits.
Features
- IEC61000-4-2 ESD 15KV Air, 8KV contact pliance
- QFN-10 (2.5×1.0×0.5mm) surface mount package
- Protects four I/O lines
- Working voltage: 5V
- Low leakage current
- Low operating and clamping voltages
- Solid-state silicon avalanche technology
- Lead Free/Ro HS pliant
- Solder reflow temperature: Pure Tin-Sn, 260~270℃
- Flammability rating UL 94V-0
- Meets MSL level 1, per J-STD-020
- Marking: B 54 or 0524P
Applications
- High Definition Multimedia Interface (HDMI 1.4)
- Digital Visual Interface (DVI)
- Unified Display Interface (UDI)
- Display Port Interface
- MDDI Ports
- PCI Express
- Serial ATA
TMDS D2+ TMDS D2-
GND TMDS D1+ TMDS D1-
TMDS D0+ TMDS D0-
GND TMDS CK+ TMDS CK-
Revision：10-Jun-15
10 9
Pin Configuration
TMDS D2+ TMDS...
