BMP180
BMP180 is Digital pressure sensor manufactured by Bosch Sensortec.
features
Pressure range: Supply voltage:
Package:
300 ... 1100h Pa (+9000m ... -500m relating to sea level) 1 3.6V (VDD) 1 3.6V (VDDIO)
LGA package with metal lid
Small footprint:
3.6mm x 3.8mm
Super-flat:
0.93mm height
Low power:
5µA at 1 sample / sec. in standard mode
Low noise:
0.06h Pa (0.5m) in ultra low power mode 0.02h Pa (0.17m) advanced resolution mode
- Temperature measurement included
- I2C interface
- Fully calibrated
- Pb-free, halogen-free and Ro HS pliant,
- MSL 1
Typical applications
- Enhancement of GPS navigation (dead-reckoning, slope detection, etc.)
- In- and out-door navigation
- Leisure and sports
- Weather forecast
- Vertical velocity indication (rise/sink speed)
BST-BMP180-DS000-12 | Revision 2.8 | May 2015
Bosch Sensortec
© Bosch Sensortec Gmb H reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch Gmb H, Germany.
Note: Specifications within this document are subject to change without notice.
Data sheet BMP180
Page 3
BMP180 general description
The BMP180 is the function patible successor of the BMP085, a new generation of high precision digital pressure sensors for consumer applications.
The ultra-low power, low voltage electronics of the BMP180 is optimized for use in mobile phones, PDAs, GPS navigation devices and outdoor equipment. With a low altitude noise of merely 0.25m at fast conversion time, the BMP180 offers superior performance. The I2C interface allows for easy system integration with a microcontroller.
The BMP180 is based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability.
Robert Bosch is the world market leader for pressure sensors in automotive applications. Based on the experience of over 400 million pressure sensors in the field, the BMP180 continues a new generation of...
