SUA3000RM2U Datasheet | Block Box

Features APC $25,000 lifetime equipment protection. Lightning and surge protection. Automatic shutdown protection if your primary utility input fails. Instant emergency backup power. Network interface facilitates automatic shutdown for file servers. EMI/RMI filtering, Smart Boost™ to correct brownouts, and Smart Trim™ to correct overvoltages. W ith the APC line of uninterruptible power supplies (UPSs), your sensitive puter systems will be protected in the event of power blackouts, brownouts, swells, sags, surges, and interference. Each UPS provides enough backup power for you to perform an orderly shutdown should a power failure occur. In addition, each UPS is equipped with highgrade surge suppression and noise filtering to give your equipment a constant supply of clean power- whether from utility or battery power. Under normal conditions, the UPS supplies power from the utility input to the load. But if the utility fails, the converter supplies AC power to the load and the disconnect switch opens. The load continues to operate normally until shutdown or until the battery wears down. Once the line voltage returns to normal, the UPS automatically transfers the load back to utility power. Visual and audible indications keep track of the battery’s capacity and current condition, including when it is low or overloaded, or when it needs to be replaced. The UPS performs a self-test on the battery during power-up and every 14 days- which gives you enough time to replace it before a problem develops. You can also manually perform a self-test with the on/test button. And batteries can be replaced without removing power from loads or sending the UPS in for service. The Smart-UPS Series has numerous varieties of backup power supplies. Choose the one that offers the most protection to fit your needs from standalone and rackmount models. All include Power Chute Plus management software. Install the Power Chute software on your PC; then connect to the Smart UPS through the serial...