900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Banner

PVL500PQ Datasheet Preview

PVL500PQ Datasheet

Photoelectric Sensor

No Preview Available !

PVL Parts Verification Array
Retroreflective Array Sensor Error Proofing and Light-Guided Assembly
• Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft)
sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multi-
ple BRT-84X84A retroreflectors)
• Highly visible green pick arrow
• Red mis-pick arrow
• Flexible mounting options; rugged steel mounting brackets
• Fast response time—excellent for part detection applications
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does NOT include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
Models
Model Number
PVL225P
PVL225N
PVL225PQ
PVL225NQ
PVL500P
PVL500N
PVL500PQ
PVL500NQ
Description
225 mm (8.9 in) length, with up to 1.5 m (4.9 ft)http://www.DataSheet4U.net/
separation between sensor and retroreflective
tape (included)
500 mm (19.7 in) length with up to 1.5 m (4.9 ft)
separation between sensor and retroreflective
tape (included)
Cable
2 m (6.5 ft), 4 wire unterminated
cable
2 m (6.5 ft), cable terminated in
12 mm QD
2 m (6.5 ft), 4 wire unterminated
cable
2 m (6.5 ft), cable terminated in
12 mm QD
Output
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
P/N 165037_web
Rev. D
1/11/2013
datasheet pdf - http://www.DataSheet4U.net/




Banner

PVL500PQ Datasheet Preview

PVL500PQ Datasheet

Photoelectric Sensor

No Preview Available !

Dimensions
PVL Parts Verification Array
L1
L2
Model
PVL225
PVL500
L1
311.5 mm (12.26 in)
592 mm (23.31 in)
L2
327.5 mm (12.89 in)
608 mm (23.94 in)
Wiring Diagram
NPN
1
3
4 Load
2
+
12-30V dc
Job Light
Enable < 1.0V dc
PNP
http://www.DataSheet4U.net/
1
3
4 Load
2
+
12-30V dc
Color Key
1 = Brown
2 = White
3 = Blue
4 = Black
Job Light
Enable > 7.0V dc
NOTE: Pin 5 (center) is not used.
Installation
Multiple sensors located farther than the sensor's maximum range from one another are unlikely to cause crosstalk problems. However,
when multiple sensors are mounted in a confined area, take care to avoid crosstalk between them. Make sure that the sensor's beams
fall in the center of the reflector.
2
www.bannerengineering.com - tel: 763-544-3164
P/N 165037_web
Rev. D
datasheet pdf - http://www.DataSheet4U.net/


Part Number PVL500PQ
Description Photoelectric Sensor
Maker Banner
PDF Download

PVL500PQ Datasheet PDF






Similar Datasheet

1 PVL500P Photoelectric Sensor
Banner
2 PVL500PQ Photoelectric Sensor
Banner





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy