Datasheet4U Logo Datasheet4U.com

PVL225NQ - Photoelectric Sensor

Download the PVL225NQ datasheet PDF. This datasheet also covers the PVL225PBanner variant, as both devices belong to the same photoelectric sensor family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (PVL225PBanner.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number PVL225NQ
Manufacturer Banner
File Size 390.60 KB
Description Photoelectric Sensor
Datasheet download datasheet PVL225NQ Datasheet

General Description

Cable 2 m (6.5 ft), 4 wire unterminated cable 2 m (6.5 ft), cable terminated in 12 mm QD 2 m (6.5 ft), 4 wire unterminated cable 2 m (6.5 ft), cable terminated in 12 mm QD Output PNP NPN PNP NPN PNP NPN PNP NPN P/N 165037_web Rev.

D 1/11/2013 datasheet pdf - http://www.DataSheet4U.net/ PVL Parts Verification Array Dimensions L1 L2 Model PVL225 PVL500 L1 311.5 mm (12.26 in) 592 mm (23.31 in) L2 327.5 mm (12.89 in) 608 mm (23.94 in) Wiring Diagram NPN http://www.DataSheet4U.net/ PNP 1 3 4 Job Light Enable < 1.0V dc 2 Load Job Light Enable > 7.0V dc + 12-30V dc – 1 3 4 2 Load + 12-30V dc – Color Key 1 = Brown 2 = White 3 = Blue 4 = Black NOTE: Pin 5 (center) is not used.

Installation Multiple sensors located farther than the se

Overview

PVL Parts Verification Array Retroreflective Array Sensor Error Proofing and Light-Guided Assembly • Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft) sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multiple BRT-84X84A retroreflectors) • Highly visible green pick arrow • Red mis-pick arrow • Flexible mounting options; rugged steel mounting brackets • Fast response time—excellent for part detection applications WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection.

Doing so could lead to serious injury or death.

This device does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications.