Datasheet4U Logo Datasheet4U.com

BCT2358 - Rail-to-Rail I/O CMOS Operational Amplifiers

Description

The BCT2358 (dual) is low cost, rail-to-rail input and output voltage feedback amplifiers.

It has a wide input common-mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V.

The maximum recommended supply voltage is 5.5V.

Features

  • Low Cost.
  • Rail-to-Rail Input and Output.
  • 0.8mV Typical Vos.
  • Unity Gain Stable.
  • Gain Bandwidth Product:1MHz.
  • Very Low Input Bias Current:10pA.
  • Supply Voltage Range:2.1V to 5.5V.
  • Input Voltage Range:-0.1V to +5.6V with VS=5.5V.
  • Low Supply Current:60uA/Amplifier.
  • Small Packaging: BCT2358 available in SOIC8.

📥 Download Datasheet

Datasheet Details

Part number BCT2358
Manufacturer BROADCHIP
File Size 334.45 KB
Description Rail-to-Rail I/O CMOS Operational Amplifiers
Datasheet download datasheet BCT2358 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BCT10-S30-UP6X2-H1151 Capacitive sensor Turck
BCT10-S30-UP6X2T-H1151 Capacitive sensor Turck
BCT5-S18-UN6X2T-H1151 Capacitive sensor Turck
BCT5-S18-UP6X2T-H1151 Capacitive sensor Turck
BCT72328 LED Driver BlueChips

Other Datasheets by BROADCHIP

Part Number Description
BCT2014 0.7uA Low Power Linear Regulators
BCT2019 RF-Linear Regulators
BCT2021 70dB PSRR 300mA Fast Response Linear Regulators
BCT2028 500mA Linear Regulators
BCT2031 RF-Linear Regulators

Full PDF Text Transcription

Click to expand full text
Ver 1.0 BCT2358 1MHz, 60uA, Rail-to-Rail I/O CMOS Operational Amplifiers GENERAL DESCRIPTION The BCT2358 (dual) is low cost, rail-to-rail input and output voltage feedback amplifiers. It has a wide input common-mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum recommended supply voltage is 5.5V. It’s specified over the extended -40°C to 85°C temperature range. BCT2358 provides 1MHz bandwidth at a low current consumption of 60uA per amplifier. Very low input bias currents of 10pA enable BCT2358 to be used for integrators, photodiode amplifiers, and piezoelectric sensors. Rail-to-rail input and output are useful to designers for buffering ASIC in single-supply systems.
Published: |