Datasheet4U Logo Datasheet4U.com

BP2329AJ - Non-isolated Buck APFC Offline LED Controller

Description

The BP2329AJ is a high precision non-isolated buck controller with active PFC, specially designed for universal input offline constant current LED lighting.

The controller with on-chip PFC circuit achieves high power factor and low THD.

Features

  • Active PFC for High Power Factor and Low THD.
  • System Efficiency up to 95%.
  • ±3% LED Output Current Accuracy.
  • Excellent Line and Load Regulation.
  • Critical Conduction Mode Operation.
  • Ultra Low (33uA) Start Up Current.
  • Ultra Low (300uA) Operating Current.
  • LED Short/Open Protection.
  • Current Sensing Resistor Open Protection.
  • Cycle by Cycle Current Limit.
  • VCC Under Voltage Protection.
  • Auto Fault Recovery.
  • Thermal Regulation Function.

📥 Download Datasheet

Datasheet Details

Part number BP2329AJ
Manufacturer BPS
File Size 307.57 KB
Description Non-isolated Buck APFC Offline LED Controller
Datasheet download datasheet BP2329AJ Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BP23F782D The 5-phase stepping Set Sanyo Denki
BP23F782S The 5-phase stepping Set Sanyo Denki
BP23F783D The 5-phase stepping Set Sanyo Denki
BP23F783S The 5-phase stepping Set Sanyo Denki
BP23F851D The 5-phase stepping Set Sanyo Denki

Other Datasheets by BPS

Part Number Description
BP2329A Non-isolated Buck APFC Offline LED Controller
BP2325 Non-isolated buck active PFC LED driver
BP2325A Non-isolated Buck APFC Offline LED Driver
BP2325AJ Non-isolated Buck APFC Offline LED Controller
BP2326A Non-isolated Buck APFC Offline LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BP2329AJ Non-isolated Buck APFC Offline LED Controller Description The BP2329AJ is a high precision non-isolated buck controller with active PFC, specially designed for universal input offline constant current LED lighting. The controller with on-chip PFC circuit achieves high power factor and low THD. Operating in critical conduction mode, the power MOSFET switching loss is reduced and the inductor is fully utilized. The BP2329AJ utilizes patent pending floating ground structure. The inductor current is sensed during the whole switching cycle. So it achieves high precision output current control, and excellent line regulation and load regulation.
Published: |