CR0402-AS
CR0402-AS is Sulfur-Resistant Thick Film Chip Resistors manufactured by Bourns.
Features n Ro HS pliant- n Small package dimensions n Power rating at 70 °C = 1/16 W n Three layer termination process with nickel barrier helps prevent leaching and provides excellent solderability n Suitable for most types of soldering processes n Standard packaging on paper tape and reel n Sulfur-resistant design
LEADFREE
CR0402-AS Series
- Sulfur-Resistant Thick Film Chip Resistors
General Characteristics
Ro HSVECROSLIMEOPALNIDSAFANRTRE- EE
Characteristic
Power Rating @ 70 °C per Resistor
Resistor Tolerance
Resistance Range
- 1 % Tolerance (E24 + E96)
Resistance Range
- 5 % Tolerance (E24), Zero-ohm Jumper
Temperature Coefficient of Resistance (TCR) 1 % Tolerance 5 % Tolerance Zero-ohm Jumper
Maximum Overload Voltage
Maximum Working Voltage
Operating Temperature Range
Storage Conditions
Derating Temperature
Packaging (Paper Tape)
Zero-ohm Jumper: Current Rating Maximum Resistance
0.063 W ±1 %, ±5 % 10 ohms to 1 megohm 1 ohm to 10 megohms,
0 ohms
±100 ppm/°C ±200 ppm/°C-
- N/A 50 V 100 V -55 to +155 °C +5 ~ +40 °C, 25~75 % RH, 1 year +70 °C 10,000 pcs. per reel
1 A per element 50 milliohms
- - TCR for 1 ohm to 9.1 ohm resistance range, 5 % tolerance is ±300 ppm/°C.
Environmental Characteristics
Specification
Test Method (JIS C 5201-1)
Short Time Overload Soldering Heat Temperature Cycling Moisture Load Life
Load Life
Sulfur Test
Rated voltage x 2.5, 5 seconds
+260 °C ±5 °C, 10 ±1 seconds -55 °C (30 minutes)
- normal (2~3 minutes) +125 °C (30 minutes)
- normal (2~3 minutes), 5 cycles +40 °C, 90~95 % RH, 1000 hours, 1.5 hours ON, 0.5 hours OFF +70 °C, 1000 hours, 1.5 hours ON, 0.5 hours OFF 3 ppm H2S, +50 °C, 90~95 % RH, 100 hours
NOTE: Zero-ohm jumper ≤100 milliohms.
Characteristics
±(2 % +0.1 ohm) ±(1 % +0.05 ohm) ±(1 % +0.05...
