BL9581 Datasheet | BELLING

FEATURES z Simple low parts count z Internal 36V NDMOS switch z Up to 1.2A output current z Single pin on/off and brightness control using DC voltage or PWM z Soft Start z High efficiency (up to 97%) z Wide input voltage range: 6V to 36V z Output shutdown z Up to 1MHz switching frequency z Inherent open-circuit LED protection z Typical 3% output current accuracy z High-side current sense z Hysteretic control: no pensation z Adjustable constant LED current z Over temperature protection z Pb-free SOT23-5 packages APPLICATIONS z Low voltage halogen replacement LEDs z Automotive lighting z Low voltage industrial lighting z LED back-up lighting z Illuminated signs z LCD TV backlighting DESCRIPTION The BL9581 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V and 36V and provides an externally output current up to 1.2A. Depending upon supply voltage and external ponents, this can provides up to 24 watts of output power. The BL9581 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. Output current can be adjusted by applying an external control signal to the 'ADJ' pin. The ADJ pin will accept either a DC voltage or a PWM waveform. During DC dimming, this will provide a continuous output current that is proportional to the external applied DC voltage. During the PWM dimming, this will provide a gated output current and the average current is proportional to the duty cycle. Applying a voltage of 0.2V or lower to the ADJ pin turns the output off and switches the device into a low current standby state. ORDERING INFORMATION BL9581 X XXX Package: RN: SOT23--5 Features : P: Standard (default, lead free) C: Customized TYPICAL APPLICATION VIN(6V-36V) Rs 0.1ohm C1 4.7u F D1 L1 47u H VIN N/C...