Datasheet4U Logo Datasheet4U.com

BL8027 - 1.5A 1.5MHz Synchronous Buck Converter

General Description

The BL8027 is a high-efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture.

The device is available in an adjustable version.

Key Features

  • High Efficiency: Up to 96%.
  • 2.5V to 6V Input Voltage Range.
  • 1.5MHz Constant Frequency Operation.
  • No Schottky Diode Required.
  • L.

📥 Download Datasheet

Datasheet Details

Part number BL8027
Manufacturer BELLING
File Size 644.59 KB
Description 1.5A 1.5MHz Synchronous Buck Converter
Datasheet download datasheet BL8027 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BL8021 1.2A 1.5MHz 7V Synchronous Buck Converter SHANGHAI BELLING
BL8022 800mA 1.5MHz 7V Synchronous Buck Converter SHANGHAI BELLING
BL8024 1A 1.5MHz 6V Synchronous Buck Converter SHANGHAI BELLING
BL8025 1A 1.5MHz 6V Synchronous Buck Converter SHANGHAI BELLING
BL8076 2A 3MHz 6V Synchronous Buck Converter SHANGHAI BELLING

Other Datasheets by BELLING

Part Number Description
BL8023B Smart meter relay driver
BL8023C 300mA Bi-Direction Relay Driver
BL8023D 300mA Bi-Direction Relay Driver
BL8023E Bidirectional relay driver
BL8023F 300mA Bi-Direction Relay Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BL8027 1.5A 1.5MHz Synchronous Buck Converter DESCRIPTION The BL8027 is a high-efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in an adjustable version. Supply current with no load is 40uA and drops to <1uA in shutdown. The 2.5V to 6V input voltage range makes the BL8027 ideally suited for single Li-Ion battery powered applications. 100% duty cycle provides low dropout operation, extending battery life in portable systems. PWM/PFM mode operation provides very low output ripple voltage for noise sensitive applications. Switching frequency is internally set at 1.5MHz, allowing the use of small surface mount inductors and capacitors. Low output voltages are easily supported with the 0.