BL0952A Datasheet PDF (Three-phase Active Energy Meter)

BL0952A - Three-phase Active Energy Meter

Description

The BL0952A/BL6513/BL6511 is the chief IC of the three-phase electrical meter and a high accuracy energy measurement IC.

With low power design, static power is only 25mW.

Features

High accuracy, less than 0.1% error over a dynamic range of 500:1 High stability during calibration, the fluctuation of output CF is less than 0.1%. Low drift, the gain variety is less than 0.1% when input frequency changes from 45Hz to 65Hz Single 5V Supply, Static Power 25mW(typical), Power solution only with Resistor & Capacitor can be adopted. The Low Frequency Output (F1, F2) can drive motor directly; The High Frequency Output (CF) can be used in calibration and data processing. Selectable.

Datasheet Details

Part number	BL0952A
Manufacturer	BELLING
File Size	510.96 KB
Description	Three-phase Active Energy Meter
Datasheet	BL0952A Datasheet
Additional preview pages of the BL0952A datasheet.

📁 Similar Datasheet

BL0952 - Phase active power meter (Shanghai Belling)

BL0955 - Single Phase Energy Meter (Shanghai Belling)

BL0930 - Single Phase Energy Meter (SHANGHAI BELLING)

BL0932 - Dual Measurement Watt-hour Meter (Shanghai Belling)

BL0932B - Bi-Directional Electric Energy Neasurement Meter (Shanghai Belling)

BL0932B - Single Phase Energy (SHANGHAI BELLING)

BL0935 - Tri Phase Electrical Energy (Shanghai Belling)

BL0936 - Multi Rate Controller (Shanghai Belling)

BL0938 - Multi Rate Controller (Shanghai Belling)

BL0939 - calibration-free metering chip (Shanghai Belling)

Full PDF Text Transcription

Click to expand full text

Three-phase Active BL0952A/BL6513/BL6511 Energy Meter FEATURES High accuracy, less than 0.1% error over a dynamic range of 500:1 High stability during calibration, the fluctuation of output CF is less than 0.1%. Low drift, the gain variety is less than 0.1% when input frequency changes from 45Hz to 65Hz Single 5V Supply, Static Power 25mW(typical), Power solution only with Resistor & Capacitor can be adopted. The Low Frequency Output (F1, F2) can drive motor directly; The High Frequency Output (CF) can be used in calibration and data processing. Selectable between the arithmetic sum of the three-phase active energies and the absolute value sum of these energies. Measure positive active power and negative active power.

Published: Jul 18, 2015 |