HCPL-0700 Datasheet | Avago Technologies

HCPL-0700, HCPL-0701, HCNW138, HCNW139, 6N139, 6N138, Low Input Current, High Gain Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully pliant RoHS 6 fully pliant options available; -xxxE denotes a lead-free product Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetec­tor to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL patible saturation voltages and high speed operation. Where desired the VCC and VO terminals may be tied together to achieve conven­tional photodarlington operation. A base access terminal allows a gain bandwidth adjustment to be made. The 6N139, HCPL-0701, and HCNW139 are for use in CMOS, LSTTL or other low power appli­ca­tions. A 400% minimum current transfer ratio is guaranteed over 0 to 70°C operating range for only 0.5 mA of LED current. The 6N138, HCPL-0700, and HCNW138 are designed for use mainly in TTL applications. Current Transfer Ratio (CTR) is 300% minimum over 0 to 70°C for an LED current of 1.6 mA (1 TTL Unit load ). A 300% minimum CTR enables operation with 1 TTL Load using a 2.2 kΩ pull-up resistor. Functional Diagram NC 1 ANODE 2 CATHODE 3 NC 4 8 VCC 7 VB 6 VO 5 GND TRUTH TABLE LED VO ON LOW OFF HIGH Features - High current transfer ratio - 2000% typical (4500 % typical for HCNW139/138) - Low input current requirements - 0.5 mA - TTL patible output - 0.1 V VOL typical - Performance guaranteed over temperature 0°C to 70°C - Base access allows gain bandwidth adjustment - High output current - 60 mA - Safetyapproval - ULrecognized- 3750Vrmsfor1 minuteand5000V rms- for 1 minute per UL 1577 - CSA approved - IEC/EN/DIN EN 60747-5-5 approved with VIORM = 1414 Vpeak for...