Datasheet4U Logo Datasheet4U.com

ATA5577M1330C-PP - Read/Write LF RFID IDIC Transponder

General Description

The Atmel® ATA5577M1330C-PP is a contactless read/write identification transponder (IDIC®) for applications in the 125kHz frequency band.

It consists of a plastic brick which accommodates the read/write IDIC ATA5577M1330C.

Key Features

  • Identification Transponder in Plastic Brick Package.
  • Includes Ferrite Coil and Capacitor for Tuned Circuit Antenna.
  • Basic Component: Atmel® ATA5577M1330C IDIC®.
  • Contactless Power Supply Contactless Downlink Data Transmission Radio Frequency fRF = 125kHz 363-bit EEPROM Memory in Total: 11 Blocks × (32 Bits + 1 Lock-Bit).
  • 7 × 32 Bits EEPROM User Memory Including 32-bit Password Memory.
  • 2 × 32 Bits Unique ID.
  • 1 × 32-bit Option Register in EEPROM.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ATA5577 Read/Write LF RFID IDIC 100 to 150 kHz ATMEL Corporation
ATA5577C Read/Write LF RFID IDIC Microchip
ATA5570 Multifunctional 330-bit Read/Write RF Sensor Identification IC ATMEL Corporation
ATA5575M1 Read/Write LF RFID IDIC 100 kHz to 150 kHz ATMEL Corporation
ATA5575M2 Read/Write LF RFID IDIC 100kHz to 150kHz ATMEL Corporation

Other Datasheets by Atmel (Microchip)

Part Number Description
ATA5580 The AES 125kHz Transponder
ATA5021 Digital Window Watchdog Timer
ATA5723 (ATA5723 - ATA5728) UHF ASK/FSK Receiver
ATA5724 (ATA5723 - ATA5728) UHF ASK/FSK Receiver
ATA5728 (ATA5723 - ATA5728) UHF ASK/FSK Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Atmel ATA5577M1330C-PP Read/Write LF RFID IDIC Transponder 125KHz DATASHEET Features ● Identification Transponder in Plastic Brick Package ● Includes Ferrite Coil and Capacitor for Tuned Circuit Antenna ● Basic Component: Atmel® ATA5577M1330C IDIC® ● ● ● ● Contactless Power Supply Contactless Downlink Data Transmission Radio Frequency fRF = 125kHz 363-bit EEPROM Memory in Total: 11 Blocks × (32 Bits + 1 Lock-Bit) ● 7 × 32 Bits EEPROM User Memory Including 32-bit Password Memory ● 2 × 32 Bits Unique ID ● 1 × 32-bit Option Register in EEPROM to Set Up the Analog Front End: ● Clock Detection Level ● Gap Detection Level ● Improved Downlink Timing ● Clamp Voltage ● Modulation Voltage ● Soft Modulation Switching ● Write Damping like the Atmel T5557/ATA5567 or with Resistor ● Downlink Protocol ●