Datasheet4U Logo Datasheet4U.com

AME9002 - CCFL Backlight Controller

Description

The AME9002 is AME’s next generation direct drive CCFL controller.

Features

  • such as soft start, duty cycle dimming control, dimming control polarity selection, undervoltage lockout and fault detection. It is designed to work with input voltages from 7V up to 24V. When disabled the circuit goes into a zero current mode. n Pin Configuration 24 23 22 21 20 19 18 17 16 15 14 13 AME9002 1 2 3 4 5 6 7 8 9 10 11 12 AME9002 1. VREF 2. CE 3. SSC 4. RDELTA 5. FAULTB 6. RT2 7. VSS 8. OVPH 9. OVPL 10.FCOMP 11.CSDET 12.BATTFB 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.

📥 Download Datasheet

Datasheet Details

Part number AME9002
Manufacturer Asahi Kasei Microsystems
File Size 627.63 KB
Description CCFL Backlight Controller
Datasheet download datasheet AME9002 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AME9001 CCFL BACKLIGHT CONTROLLER Analog Microelectronics
AME9172 Bus Termination Regulator Analog Microelectronics
AME9172M Bus Termination Regulator Analog Microelectronics
AME05 5 watt encapsulated ac-dc converter AIMTEC
AME1-AZ AC-DC Converter AIMTEC

Other Datasheets by Asahi Kasei Microsystems

Part Number Description
AME9003 CCFL Backlight Controller
AME8830 Fast Turn On 150mA CMOS Regulator
AME8831 Low-Quiescent LDO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AME, Inc. AME9002 www.DataSheet4U.com y nar i m i l Pre CCFL Backlight Controller n General Description The AME9002 is AME’s next generation direct drive CCFL controller. Like its cousin, the AME9001, the AME9002 controller provides a cost efficient means to drive single or multiple cold cathode fluorescent lamps (CCFL), driving 3 external MOSFETs that, in turn, drive a wirewound transformer that is coupled to the CCFL. However the AME9002 includes extra circuitry that allows for a special one second start up period wherein the voltage across the CCFL is held at a higher than normal voltage to allow older tubes (or cold tubes) a period in which they can “warm up”.
Published: |