www.DataSheet4U.com
[ 2 YEAR WARRANTY ]
PM900 SERIES
Single and dual output
• Extremely tight line and load regulation
• Short circuit protection
• Pi input filter
• Low ripple output current
• Conducted noise EN55022, EN55011 level B
• Linear topology for high output accuracy and regulation
The PM900 Series of 5 and 6 Watt DC/DC converters are a broad line of high
performance modules with many important features and specifications as
standard. All models contain Pi-type input filters to minimise reflected ripple
current. They are packaged in low profile 2.0 x 2.0 x 0.4 inch cases with
standard and two alternate pin-outs designed for direct PC card mounting. The
units also feature output current limiting, short-circuit protection and
input/output isolation of 500VDC. Other specifications include: an efficiency of
65%; line regulation of ±0.02%; load regulation of ±0.04% for single output
models and ±0.05% for dual output models; low ripple and noise (10mV pk-pk
for single output models and 6mV pk-pk for dual output models); and an output
voltage accuracy of ±1.0%. PM900 Series DC/DC converters are intended for a
wide variety of general industrial applications, especially where low noise
performance is required.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Voltage accuracy
±1.0%, max.
Line regulation
NL to FL
±0.02%
Load regulation
FL to NL, Single outputs
FL to NL, Dual outputs
±0.04%
±0.05%
Cross regulation
Dual outputs
(Voltage balance)
±0.5%, max
Ripple and noise
20MHz BW
Single output
Dual output
10mV pk-pk, typical,
65mV pk-pk, max.
6mV pk-pk, typical,
35mV pk-pk, max.
Transient recovery
time to 0.1% of final
value
NL to FL, all outputs
FL to NL, single output
FL to NL, dual output
10µs
200µs
20µs
Temperature coefficient Single output
Dual output
±0.02%/°C
±0.01%/°C
Current limit
130% to 180% Iout
Short circuit protection See Note 4
Thermal limit
INPUT SPECIFICATIONS
Input voltage range
See table on facing page
Input filter
See Note 3
Pi network
EMC CHARACTERISTICS
Conducted emissions EN55022, EN55011, FCC 15 Level B
GENERAL SPECIFICATIONS
Efficiency
Single output
Dual output
61%, min.
62%, min.
Isolation voltage
500VDC, min.
Switching frequency Fixed
20kHz, min.
Case material
UL94V-0
Non-conductive
black plastic
Weight
57g (2oz)
MTBF
680,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient –25°C to +71°C
Non-operating amb. –40°C to +125°C
Case
+95°C, max
Derating
None required
Cooling
Free-air convection
cooled
Relative humidity
Non-condensing
20% to 95% RH
Altitude
Operating
Non operating
10,000 feet max.
40,000 feet max.
Vibration
5Hz to 500Hz
2.4G rms (approx.)
Data Sheet © Artesyn Technologies® 2000
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
PAGE 1
