3T20AP-6115 Datasheet | Artesyn

features include: short circuit protection; remote on/off; parallelability and remote sensing. The 3T Series modules are unique open board DC/DC converters that help solve tough power system requirements. [ 2 YEAR WARRANTY ] SPECIFICATION OUTPUT SPECIFICATIONS Output voltage (Adjustable) Remote sense Line regulation +10V to +60V (See Note 1) Load regulation Ripple and noise 3T12AP 3T20AP 3T5AN 3T12AP 3T20AP 3T5AN All specifications are typical at nominal input, full load at 25°C unless otherwise stated GENERAL SPECIFICATIONS +4.5VDC to +30VDC +4.5VDC to +15VDC - 4.5VDC to - 30VDC Remove JP1 for remote sense operation See Figure 2 See Figure 2 ±0.2% ±1.0% Efficiency Switching frequency Approvals and standards Weight 3T12AP 3T20AP 3T5AN MIL-HDBK-217C 75% typical 25k Hz UL478 CSA C22.2-234 No. 950 0.30kg (10.59oz) 0.40kg (14.12oz) 0.35kg (12.36oz) 95,000 Hours NL to FL (See Note 2) 3T12AP 3T20AP 3T5AN +5V (8A to 16A) MTBF 150m V Pk-Pk, max. 150m V Pk-Pk, max. 250m V Pk-Pk, max. ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient: 3T12AP, 3T5AN 3T20AP Non-operating 3T12AP, 3T5AN 3T20AP Non-condensing Operating Non operating 0°C to +50°C 0°C to +70°C - 20°C to +85°C +60°C +80°C 5% to 80% RH 10,000 feet max. 30,000 feet max. Transient response (3T20AP) 200m V pk transient, 1ms recovery to 1% +15V (8A to 16A) 350m V pk transient, 0.8ms recovery to 1% ±3m V/°C Minimum 3T12AP 3T20AP 3T5AN 3V(Vin≥15V), 5V(Vin<15V) 3.5V(Vin≥15V), 5V(Vin<15V) See Figure 1 17A ±10% 24A to 27A 8A ±15% Standard 1 2 3 Maximum heatsink temperature Relative humidity Altitude Notes Temperature coefficient Input/output voltage differential Output current limit (Factory set) Soft start 3T12AP 3T20AP (See Note 3) 3T5AN INPUT SPECIFICATIONS Input voltage range Remote ON/OFF See Figure 1 Inhibit Operate 10VDC to 60VDC >3V <1V Line regulation is over the full +10V to 60V input range. Load regulation is over the range of no load to maximum average output current. The current limit of...