Datasheet4U Logo Datasheet4U.com

APX6219 - PWM Stepper Motor Driver

Description

The APX6219 is designed to drive both winding of a two-phase bipolar stepper motor or bidirectionally control 2 DC motors.

APX6219 includes two Hbridges capable of continuous output current of ±750 mA with peak start up to 1A and operating voltages up to 28V.

Features

  • Able to Drive Both Windings of Bipolar Stepper Motor Up to 750 mA Continuous Output Current for Each Winding Up to 28V Output Sustaining Voltage Internal PWM Current Control Built-in Protection Diode Low Output Saturation Voltage Internal Thermal Shutdown Lead Free Available (RoHS Compliant) General.

📥 Download Datasheet

Datasheet Details

Part number APX6219
Manufacturer Anpec Electronics
File Size 367.96 KB
Description PWM Stepper Motor Driver
Datasheet download datasheet APX6219 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
APX632 High Sensitivity Hall-Effect Sensor ANPEC
APX6861 Direct PWM Variable Speed Fan Motor Driver ANPEC
APX6980 Single-Phase Full-Wave Motor Driver ANPEC
APX1117 1A LOW DROPOUT POSITIVE ADJUSTABLE Diodes Incorporated
APX284 High Sensitivity Hall-Effect Sensor ANPEC

Other Datasheets by Anpec Electronics

Part Number Description
APX6223 DSC Motors Driver
APX1690 9-Set Over Voltage Protector
APX9131 Hall Effect Micro Switch
APX9132 Hall Effect Micro Switch
APX9136 Hall Effect Micro Switch

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com APX6219 PWM Stepper Motor Driver Features • • • • • • • • Able to Drive Both Windings of Bipolar Stepper Motor Up to 750 mA Continuous Output Current for Each Winding Up to 28V Output Sustaining Voltage Internal PWM Current Control Built-in Protection Diode Low Output Saturation Voltage Internal Thermal Shutdown Lead Free Available (RoHS Compliant) General Description The APX6219 is designed to drive both winding of a two-phase bipolar stepper motor or bidirectionally control 2 DC motors. APX6219 includes two Hbridges capable of continuous output current of ±750 mA with peak start up to 1A and operating voltages up to 28V. Motor winding current can be controlled by the internal fixed-frequency, pulse-width modulated (PWM), current-control circuitry.
Published: |