Datasheet4U Logo Datasheet4U.com

AME5106 - PWM Control 2A Buck Converter

Description

AME5106 provides low-ripple power, high efficiency, and excellent transient characteristics.

The PWM control circuit is able to vary the duty ratio linearly from 0 up to 100%.

Features

  • as low current consumption. Since this converter can accommodate an input voltage up to 18V, it is also suitable for the operation via an AC adapter. PWM Control 2A Buck Converter n.

📥 Download Datasheet

Datasheet preview – AME5106

Datasheet Details

Part number AME5106
Manufacturer Analog Microelectronics
File Size 252.53 KB
Description PWM Control 2A Buck Converter
Datasheet download datasheet AME5106 Datasheet
Additional preview pages of the AME5106 datasheet.

📁 Similar Datasheet

  • AME5170 - Low Cost Micro Power Boost DC/DC Converter (AME)
  • AME5172 - 0.85V Single Cell Boost DC-DC Converter (AME)
  • AME50461 - ADVANCED ANALOG EMI FILTER (International Rectifier)
  • AME5258 - 600mA Synchronous Buck Converter (AME)
  • AME5268 - 340KHz Synchronous Rectified Step-Down Converter (AME)
  • AME5269 - 340KHz Synchronous Rectified Step-Down Converter (AME)
  • AME5283 - Rectified Step-Down Converter (AME)
  • AME5284 - Rectified Step-Down Converter (AME)
  • AME5285 - Rectified Step-Down Converter (AME)
  • AME5286 - Rectified Step-Down Converter (AME)
Other Datasheets by Analog Microelectronics
  • AME5104 - DC/DC Buck Converter
  • AME5107 - PWM Control 3A Buck Converter
  • AME5110 - PWM Buck DC-DC Converter
  • AME5130 - Micropower Step-Up DC/DC Converter
  • AME5131 - Low Power DC/DC Boost Converter
  • AME5136 - Integrated White LED Driver
  • AME5138 - Micropower Step-Up DC/DC Converter
  • AME5142 - White LED Boost Converter

Full PDF Text Transcription

Click to expand full text
AME, Inc. AME5106 n General Description AME5106 provides low-ripple power, high efficiency, and excellent transient characteristics. The PWM control circuit is able to vary the duty ratio linearly from 0 up to 100%. This converter also contains an error amplifier cirwww.DataSheet4U.com cuit as well as a soft-start circuit that prevents overshoot at startup. An enable function, an over current protect function and a short circuit protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced from 350KHz to 30KHz. Also, an internal compensation block is built in to minimum external component count.
Published: |