Datasheet4U Logo Datasheet4U.com

MAX31331 - I2C Real-Time Clock and Power Management

Description

The MAX31331 ultra-low power, real-time clock (RTC) is a time-keeping device that consumes nominal 65nA timekeeping current, extending battery life.

The MAX31331 supports a wide range of 32.768kHz crystals.

Features

  • a backup supply pin (VBAT) and automatically switches over to the backup supply (VBAT) when the main supply (VCC) drops below the programmed threshold voltage and the backup supply (VBAT) voltage. Other features include two time-of-day alarms, interrupt outputs, programmable square-wave output, event detection input with timestamping, and a serial bus timeout mechanism. The 32-byte timestamp registers double as RAM storage. The device features a digital Schmitt trigger input (DIN) which can be u.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX313 10 / Quad / SPST / CMOS Analog Switches Maxim
MAX3130 3V to 5.5V / IrDA Infrared Transceiver with Integrated RS-232 Interface Maxim
MAX3131 3V to 5.5V / IrDA Infrared Transceiver with Integrated RS-232 Interface Maxim
MAX31341B Real-Time Clock Maxim Integrated
MAX31342 Real-Time Clock Maxim Integrated

Other Datasheets by Analog Devices

Part Number Description
MAX31334 Ultra-Low-Power Real Time Clock
MAX31343 I2C Real-Time Clock
MAX31732 Four-Channel Remote Temperature Sensor
MAX30003 Single-Channel Integrated Biopotential AFE
MAX30009 Bioimpedance Analog Front-End

Full PDF Text Transcription

Click to expand full text
Click here to ask an associate for production status of specific part numbers. Ultra-Low-Power, I2C Real-Time Clock and Power Management MAX31331 General Description The MAX31331 ultra-low power, real-time clock (RTC) is a time-keeping device that consumes nominal 65nA timekeeping current, extending battery life. The MAX31331 supports a wide range of 32.768kHz crystals. A crystal with any capacitive loading (CL) spec can be used, which broadens the pool of usable crystals for this device. This device is accessed through an I2C serial interface. The device also features a backup supply pin (VBAT) and automatically switches over to the backup supply (VBAT) when the main supply (VCC) drops below the programmed threshold voltage and the backup supply (VBAT) voltage.
Published: |