Datasheet4U Logo Datasheet4U.com

MAX25252 - Five-Output ASIL B PMIC

General Description

The MAX25252 is a high-efficiency, five-output ASIL B PMIC with three DC-DC converters, and two high-PSRR LDOs, with OV/UV monitoring on all outputs.

OUT1 is a 1A high-voltage, synchronous step-down converter operating from power over coax.

Key Features

  • temperature monitoring with external NTC. The IC accurately measures PCB temperature and flags the temperature warning through RESET. The device features a 2.1MHz fixed-frequency PWM mode for better noise immunity and load transient response. The 2.1MHz frequency operation allows for the use of all ceramic capacitors and minimizes external components. The programmable spread-spectrum frequency modulation minimizes radiated electromagnetic emissions. The I2C programmable output voltages and seque.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX25250 Four Output Mini PMIC Maxim Integrated
MAX252 Dual RS-232 Transceiver Maxim
MAX250 +5V Powered Isolated RS-232 Drivers/Receivers Maxim
MAX251 +5V Powered Isolated RS-232 Drivers/Receivers Maxim
MAX2510 Low-Voltage IF Transceiver Maxim

Other Datasheets by Analog Devices

Part Number Description
MAX25201 36V HV Synchronous Boost Controllers
MAX25202 36V HV Synchronous Boost Controllers
MAX25203D Dual-Phase Synchronous Boost Controllers
MAX25203E Dual-Phase Synchronous Boost Controllers
MAX25262 65V 2A Mini Buck Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX25252 Click here to ask an associate for production status of specific part numbers. Five-Output ASIL B PMIC with Accurate Temperature Monitoring for Next-Generation Camera Sensors General Description The MAX25252 is a high-efficiency, five-output ASIL B PMIC with three DC-DC converters, and two high-PSRR LDOs, with OV/UV monitoring on all outputs. OUT1 is a 1A high-voltage, synchronous step-down converter operating from power over coax. OUT2 and OUT3 are low voltage synchronous step-down converters and provide a 0.75V to 3.9375V output voltage range. OUT2 and OUT3 can deliver up to 1.7A current respectively for the highmegapixel cameras and high-speed serializers. LDO4 and LDO5 deliver up to 0.4A and 0.9A of current to power the secondary rails of the imager and a serializer.